1997 350 warrior completely custom rebuilt from the ground up custom paint all... — Yamaha Warrior Raptor YFM350

netboard

1997 350 warrior completely custom rebuilt from the ground up custom paint all new bearings and bushings K&n air filter bored .20 over with 12.5:1 high compression prolight piston new valves new valve springs new vale guides and seals new rocker arms wiesco crank fmf megamax 2 exhaust new chain whole complete extra set of wheels and tires 5 extra shocks 2 extra sprockets skid plates air filter extra cases stators extra clutch cable all kinda of extra stuff and unlike most warrior this one has a clear Tittle like to sell or trade for a nice kx 125 rm 125 or yz 125 or 250 4 stroke bike or a good running 400 ex located in Jacksboro TN

%d comments

mga paps pa recommend naman ng magaling na mekaniko pls di nila maayos ayos... — Yamaha Sniper 135 Classic

mga paps! pa recommend naman ng magaling na mekaniko pls! di nila maayos ayos sniper ko dito badtrip.. ung malapit lang sana dito sa las pinas or paranaque or pasay. dadayuhin ko pa promise. ung magaling sana tumingin ng sakit ng sniper natin hindi ung panay haka haka lang. wew TIA

%d comments
  • rizal bro

  • un tensioner kc self adjust khit ndi mo higpitan..baka timing chain f luma n...kung d nmn nag uusok ndi s piston yan..ndi ky baligtad ang kbit ng piston.intake npunta s exhaus

  • Palitan mo timing chain tensioner..possible po malaki na play ng tensioner mo..try mo tanggalin mo tensioner mo tapos diinan mo ung timing chain don sa butas ng pinag alisan mo ng tensioner habang naka a start engine mo.. pag nawala ingay palitan mo na tensioner mo..

In need of a good good carb guy for my 02 warrior. Mikuni carb. Any takers — Yamaha Warrior Raptor YFM350

In need of a good good carb guy for my 02 warrior. Mikuni carb! Any takers?!

%d comments
  • I think there is a link on the YFM350 forums that has the service manual download. It will have all the specs and pics of what to do.

  • Thanks

  • Thanks for the manual link . I downloaded it. Adjusted the float to what i THOUGHT seems right. Now just turning the gas cock on gas pours out the over flow. Float too high im guessing?

All — Yamaha Past Masters Racing Forum

All

This is the official set of dates - same as on bemsee but with the 1st Brands Indy dropped - Just one duplicate round at Snett 300 - 1 a month apart from May

Snetterton 300: 26-27th April

Silverstone International: 10-11th May - Hangar Straight, Stowe, Club, Abbey and the Wing…not been raced by bikes before…there will be a testday Friday

Oulton Park: 24th May & 26th May - Full testday Friday, then 2-days racing on Saturday and Bank Hols Monday, sightseeing/relaxing on the Sunday

Donington GP: 21-22nd June

Cadwell Park: 19-20th July

Brands Hatch GP: 9-10th August - (Indy Testday on Friday)

Snetterton 300: 6-7th September

Brands Hatch Indy: 4-5th October

Fish

%d comments
  • Y'all have to remember that, the last time Lee Finney raced, pneumatic tyres hadn't been invented and, straw bales were cutting edge technology! :-$ I have to say that, if I was in YPM's this year, I would be quite minted with the variety and selection of tracks for the seasons year, given all things considered. I told you to watch out, YPM class of 2014! Love, Armchair Racer Kernel.

  • It is indeed a superior spread of dates/venues for the YPM's which I'm sure will please most people, no one glove fits all. Its going to be a long enjoyable season and as Len has pointed out Bemsee will organise Friday practice for those circuits where it is happening.

  • For my two penn'orth, I agree with Pete; this looks like a fantastic season and I'm chuffed as little mint balls with the calendar.

zx9 swinger and zx9 pivot bolt and fj pivot bolt — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

zx9 swinger and zx9 pivot bolt and fj pivot bolt

%d comments
  • 04 05 06 are the 5VY, 07 is the newer one, ill have to measure 6cm, 60mm seems big difference, if its that much shorter ill need drag slots

  • with thanks to Alex Gurken

  • just been in the cave for a measure up, Thunderace is 530 spindle to mid slot as is the alloy 3cv arm, the 2005 R1 is 600mm, so that will be the one going into the turbo then

For sale 09 yamaha sniper 135 h c 1st owned No accidents Engine never been... — Yamaha Sniper 135 Classic

For sale 09 yamaha sniper 135 h/c. 1st owned. No accidents. Engine never been opened. Change oil only. As is.

Accessories. Orig yamaha rearset. Rear is already disc break. Sss alloy sprockets. Sss chain. All flairings are already in stainless allen screws. Racing boy levers. Givi hand grip. Orig gazi rear shock gas type. Hid already. Orig typeR led park lights. Racing boy mags. Orig dunlop tires for circuit size and the mags. Combiz front fork cover. Brembo caliper. Brembo caliper holder. Dbs big disc alloy. Orig carbon fiber dbs muffler. Moto suit seat cover. Led rear park light. Underneath. Racing air filter. Yamaha radiator cover. Orig paint. See to appreciate. Very fresh. No hidden defects. Reason for selling. Upgrading bike. Im selling it only for 55k fixed price. Take it or leave it. Just pm me for the sure buyers. Location orani. Thanks.

%d comments
  • pang raider150 ba ung pipe boss?

  • magkano yan sir.pls pm

  • Nandyn na sir yung price.. Thanks

Photos from Christian Gonzaga Rey's post — Yamaha Mio Mx 125 Parking Lot

repost:

East side damay-damay (pasig,marikina,cainta,taytay,angono,binangonan,ta nay,montalban and nearby areas) is inviting all member non-member and newbies to join our tambay,tagay,kainan,chickskahan or even meet-ups sa mga bentables nyo and opkurs meeting for our up-coming Grand EB.

Venue will be in Brookside Hills Subdivision (oval park clubhouse) in Cainta Rizal bukas n po ito jan 17 friday 2014

tambay starts @ 4pm para matagal din at sulit ang pagpunta ng mga nasa malayung lugar. Para sulit po ang punta nyo mamemeet nyo po ang aming

President Boyzatwin Zönë Läm Päng

Vice Pres Choei Nobleza

Sexytary Marie Condecido

magbigay ng konting history ng TMMX si papa Dredd :)

small talk about Rider's Rights ang Q/A si papa Dong Literal ng MRO

ang idol ng lahat si boss Pee See para sa usapang mamaw

darating din po si papa P ng abs-cbn kasama gf nya.

ako pupunta rin wala lang gusto ko lng

konting info lng po be ready po para sa payment ng Grand EB P500 para dun resort, food and raffle ng gaganapin sa jan 25, 2014 para po dun sa gustong sumama

%d comments
  • Di ko maipangako.. Papahasa pa ako tari, punta pa farm.. Habol ako

  • ok intay k namin dala k double black hehhe

  • After wsc na bff.. Bawala na ko alak simula ngayon gabi

Curiosity. after you re done with your FZ6R what s next on the shopping list — Yamaha FZ6R Owners

Curiosity: after you're done with your FZ6R, what's next on the shopping list? I'm due to change in September and want to start looking during the year to consider which bike suits me best. I always thought I'd go R6/R1 but the CBR600RR is a nice alternative. I've even considered going for a cruiser! Heaven forbid at 29 years of age, although I'll have turned 30 by then and probably feel like an old bastard and go cruiser haha! Anyway, opinions/suggestions on a postcard please :)

%d comments
  • ...what Dan said! I use my bike mostly for commuting. It's cheap to run, has decent MPG, and it's comfy as hell. But for rippin around town or being a total hooli, I want an FZ-09 or a Supermoto alongside my FZ6R.

  • I bought mine as I needed a learner legal to get my licence in Australia (in Ireland I rode with no licence tsk tsk) and having viewed a few the fz6r was by far the best looking and most comfortable and wasn't incredibly expensive. It keeps me going until I can get my full licence and then move up a power grade or two. But don't get me wrong, I love my fz6r, it's quick, forgiving and comfortable as well as looking gorgeous! Just don't think I can afford to keep a second bike with it as well as 2 cars...

  • The guy I bought my 6R from sold it to get a FZ-09. Like Demond said, he also wanted a "hooli" bike. He's enjoying the ever changing challenges the 09 shows him. He said the 09 is not a bike for an inexperienced rider. He also has a Harley Slim for the non-hooli rides!

Here u go guys ill just post how it sounds on here sounds good. And cost me 40 — Yamaha FZ6R Owners

Here u go guys ill just post how it sounds on here sounds good. And cost me 40$

%d comments
  • I posted one earlier. But its just of the weld placements. But like I told the guy earlier I was on the phone while he had a torch to it. So im not 100%

  • Ok thanks man i saw it now, i understand what you talking about now..haha..

  • Thank god cause I didnt know how else to explain it

Booked the hotel for the length of the rally I am definitely in now to get... — Yamaha Stryker Owners

Booked the hotel for the length of the rally. I am definitely in, now to get myself and the bike road ready for the ride down.

%d comments
  • Jeff, why haven't you booked yet? You know you don't have to pay until you get there. They only need a credit card to secure the room, but won't charge it until you get there. I have been told all rooms and the Best Western are booked, so you will have to call the Microtel.

  • Seems to me they booked up earlier this year. Don't remember committing this early last year. There are always the last minute cancellations due to unplanned events but it looks like the rally might even be bigger this year!

  • Last night I was looking back at last years Rally info. They didn't book up until May. I think we are going to have a very large turnout this year.

Raymond Requiza posted in Yamaha Sniper 135 Classic — with Lazo Trinidad Patrick. — Yamaha Sniper 135 Classic

ask lng,,,,ganyan din ba ang pabrika ng yamaha sniper?ask lng kong ganyan ka taas quality.

%d comments
  • denmark, sir posibsle sguro kong sadista ang me ari o driver ng snipee nate.pero smpre malinaw na matibay makina yamaha.alala ko cnabi ng hapon na nka r1 sa sm hyper makati non s parking.sabi nya saken sabay turo snoper ko,,,YAMAHA?GOOD MOTO,YAMAHA BEST QUALITY.GOOD YAMAHA U BUY...sinagot ko lang ung hapon na okay yamaha here phil.sabay ngeti s aking mappulang labi.hehehe....wew!

  • Hehehe sarap nanaman pakinggan paps Raymond

  • sarap ba...hehe...boss ng ngenitian kk ung hapon nammila pa ang labi ko.hahaha...naka lipsticks.patay ako nito.hahaha

Going through the archives scanning photos Now this must have been taken way... — Yamaha Past Masters Racing Forum

Going through the archives scanning photos. Now this must have been taken way back when God was a boy . . . . if you look closely you can see a NOVICE vest :-o

%d comments
  • Hey! Who's that young bespectacled No Vice 43 year old yoof on my bike!!? The beast WILL arise again! ......So will the bike. As Small says....everything is in place!....except the engine, the lekky and the engineer's fingers....! ;-) And, that Golden Ball helmet! Long before Jorge Lorenzo had his golden bonce...my business partner Steve Ball, water gilded my Arai in 1996, with 22 and a quarter carat gold leaf, which I lacquered. I was still using that helmet on my commute to work till the end of last year! It not quite so gold now....it's a bit distressed, like it's owner! And, the leathers aren't looking so bright either! Still, with a bright orange bib, things could look much the same, later this year! :-)

  • Ohh . .dear . . . . gets more med supplies ;-)

  • Mr Beckham may well have golden balls . . .but you sir have a golden helmet :-D

Greetings from Upstate South Carolina It is nothing fancy but I have only had... — YAMAHA PICS MODIFICATIONS

Greetings from Upstate South Carolina. It is nothing fancy but I have only had this bike for about two months. It is not even properly broken in.

%d comments
  • How do you like those pipes? Is it cracky. Or rumbly when you accelerate? I was lookin at a set for mine. My baffles are out so it sounds better than stock and not real loud.

  • When I first installed these Cobra Speedster Longs, they were cracky, obnoxious loud. I installed additional baffles from www.smartpartz.com This toned them down a lot. At the same time, I added the Baron's BAK along with a Cobra PowerPro FMS. Now, it is sweet. No more popping on decal and it sounds incredible. I am going to make a video/audio of them when I have a spare set of hands and it is not too bad on the weather.

  • Thanks

Almost done — YAMAHA PICS MODIFICATIONS

Almost done(:

%d comments
  • Are you talking about the suspension? I've never looked hard into it but it has the hidden suspension on the rear that I can't see if that's what you mean chris

  • Fender struts, the things that hold your fender.

    They are ^

    I googled it.

    I wouldn't cut your fender unless your lowering it a bit because it looks ugly sitting that high

  • Ohh duh I didn't know what you were talking about haha...yea I figured I would have to lower it..how do you lower it..is that an adjustable coil or something..haven't seen it yet

Any fog prevention items you guys use and recommended At night when it s cold... — Yamaha FZ6R Owners

Any fog prevention items you guys use and recommended? At night when it's cold I have to always open the face shield up a bit but I'd prefer not to. Thanks

%d comments
  • Dawn Dishsoap..... no shit..... Weird but it works. You have to buff some in and then buff it with a clean microfiber towel. Not gonna lie, I'm looking for other options but it seems to work in the meantime. Seems like you all like that pinlock shiznit. Gonna have to check that out.

  • Looks like the only bitch about the pinlock system is that it's for certain manufactures only. They don't make one for my scorpion.

  • http://www.rei.com/product/752088/ek-ekcessories-c at-crap-spray-on-anti-fog-lens-cleaner-1-oz

    this is what i am currently using... it lasts about half the day, and works very well. but pinlock system is the best way, if your brand has it available.

grabe tlga kla ko mdli nko knina gling ako sa nagthn pkaliwa ng pandacn ngulat... — Yamaha Sniper 135 Classic

grabe tlga kla ko mdli nko knina, gling ako sa nagthn pkaliwa ng pandacn ngulat ako may biglng humrurot hinbol ang beating the redlight.. pajero white ang mga nkskat pla mga bsg ng malacanag.. buti nlng ok isipan ko tumlon ako sa awa ng dyos konteng glos lng npla ko pero sniper ko may part n nbsg ung fairings sa harap at nbaluktot ung clutch caliper ko.. ang bilis tlga maswerte ako at ako d ako inbot ng husto... yn nga lng ngyon bglng my bumukol sa binti ko ngbgy nmn ng number at pwede ko daw cya punthn sa malcanang hnpin ko lng cya ang tnong kung entertained p nya ko pero ngbgy ng pera pero alm ko kulng.. sbi ng bsg wla ndaw cia pera punthn ko nlng daw cya sa malacanang... hayyyyy

%d comments
  • pm u nlng hospital.pwd kya mg pa checkup online?hehe

  • puntahan mu tol ok namanskausap yan kungmga psg yan .............. basta tand amu ang plate number ok sila kausap ............. punta kalang kung nakuhamunameng tao ........... kung kulang ang per ana binigay dpat nagpa blotter ka agad nyan............ madlai naman sila kausap dyan

  • basta pagpunta mu dalinmu stimate ng sera ng motor mu .para alam nya damage nya ...........maganda kung humingi kangnumber .kc kung binigyanka nyang number tyak magbabayad yan ........

pauwi ako kanina galing skwela nasa 100kph ung takbo ko ng my biglang nag... — Yamaha Sniper 135 Classic

pauwi ako kanina.galing skwela.nasa 100kph ung takbo ko..ng my biglang nag overtake skin na tmx155 lowerd.nka open pipe.matanda ung rider.pinabayaan ko.tpos nililingon nya ako.yung paraan ng pag lingon nya skin ay parang gusto nya na patulan ko siya.nag pinatulan ko.3rd gear ko plang eh..maabotan kona cya.hehehe.napahiya tuloy ung matanda.ng tumawid na ako.papasok sa bahay namin.bumalik lng kaagad..hahaha.hinatid lng nya pala ako...advice kulang sa mga higher displacement engine na mtor.kunting respeto nman sa mga lower cc sa daan..dahil kung minsan baka kayo pa ang mapapahiya pag pinatulan..wag nyu lng pag i under estimate ung yamaha sniper 135 namin..hehehe

share lng po.

%d comments
  • Punta ka sa shop namin dito? Hihintayin ka dun ni paps Alan James Sitchon hehe

  • Punta ka sa shop namin dito? Hihintayin ka dun ni paps Alan James Sitchon hehe

  • copy po.cmpl8 add

APA KABAR PECINTA RASULULLOH JAMAAH AHBAABUL MUSTHOFA JAWA TIMUR — YMJT (YAMAHA MIO JAWA TIMUR)

APA KABAR PECINTA RASULULLOH & JAMAAH AHBAABUL MUSTHOFA JAWA TIMUR ???

SUDAH SIAPKAH ANDA BERSHOLAWAT BERSAMA GURU KITA HABIB SYECH BIN ABDUL QODIR ASSEGAF

|||| HADIRILAH ||||

MALAM CINTA RASUL JAWA TIMUR BERSHOLAWAT

17 JANUARI 2014 M: PERTIGAAN PASAR SEMBAYAT MANYAR - GRESIK

18 JANUARI 2014 M :JL.BOLODEWO -SURABAYA

19 JANUARI 2014 M : LAP. SURAMADU BARAT - SURABAYA

20 JANUARI 2014 M : P.P HIDAYATUL MUBTAD'IN TASIKMADU - MALANG

NB: BERSHOLAWATLAH KALIAN DENGAN GEMBIRA DAN DENGAN ADAB YANG ADA/BAIK ( HABIB SYECH BIN ABDUL QODIR ASSEGAF)

INGAT SYEKHERMANIA ITU AJIB :

=================================

1. UNTUK TIDAK BERJOGET KETIKA MAJELIS BERLANGSUNG

2. UNTUK TIDAK MENGIBARKAN SEMUA BENDERA ( YANG TERLALU BESAR )

3. MENJAGA LISAN ( TIDAK BERTEPUK TANGAN / BERSIUL ) & MENAATI INTRUKSI PANITIA

4. MENDENGARKAN DAWUH PARA KYAI DAN HABAIB

5.TIDAK MEROKOK SAAT MAJELIS BERLANGSUNG

-------------------------------- ------------------------------------

"KARENA BUKAN ACARA KONSER TAPI

MAJELIS DZIKIR DAN SHOLAWAT

DUDUK DAN BISMILLAH "

-SYEKHERMANIA ITU KEBANGGAN NU DAN SEMUA -

* GEMBIRAKANLAH RASULULLOH DENGAN AMAL DAN AHLAK KALIAN SEBAGAIMANA RASULULLOH MEMBELA KALIAN

*TUNJUKAN AHLAK BAIK KITA DIMANA PUN KALIAN BERADA

( HABIB SYEKH BIN ABDUL QODIR ASSEGAF )

-- *** SHOLLU 'ALAN NABI MUHAMMAD ***

%d comments
  • Absen dan...cz kge mrantau

New Cobra Powrflo air intake — YAMAHA PICS MODIFICATIONS

New Cobra Powrflo air intake

%d comments
  • Yes I know, its like the bike can breathe now!!!

  • (More air in + more air out = more efficient operation) On the other side of the coin, the bike will use more fuel. These bikes are lean from the factory I suppose for emissions testing and what have you. All I know is, the bikes like it better when they can breath.

  • That's on my list for this spring. Hope you have fun

Yamaha sniper 135 matic — Yamaha Sniper 135 Classic

Yamaha sniper 135 matic

Forsale allstock engine as is nayan ganyan nayan nung nabili ko 2010 last reg . Tipid sa gas

Issue

Lost cr. Pero my xerox aq. At my deed of sale pti id ng 1st owner kumpleto lahat. Papagawan q nlng ng appidavit of lost

Negotiable wag lng tatawad ng sagad salamat

Open for swap

Offer lang. Gadget or motorcycle bsta branded

Binangonan rizal area

Kindly check po sa sulit no lto alarm or anything 33k negotiable yamaha sniper 135 automatic presyong wave125 check nyo po sa sulit. Pipita1234 madaming pic don

%d comments

    Is the timing chain tensioner adjustable on a warrior or is it supposed to... — Yamaha Warrior Raptor YFM350

    Is the timing chain tensioner adjustable on a warrior or is it supposed to automatically adjust the tension?

    %d comments
    • Where did you find one for $25? I looked it up on a couple vendor sites and it is around $50-$60.

    • I thought I saw them on eBay . I just briefly looked on my phone. Maybe those were used if they are normally $50. Ill have to look on comp when I get home

    • I looked on E-Bay just now and they are around $60. From what I can tell you can't buy just the spring by itself.

    Ever thought of Being a Bemsee ACU Club Coach — Yamaha Past Masters Racing Forum

    Ever thought of Being a Bemsee ACU Club Coach?

    We lead the way by a country mile (or Oulton Park lap!) with our rider Development Program compared to any other club or track organisation in the UK. The reason behind this is we have the best instructors who are passionate about helping other riders (new or a few seasons in) develop and enhance their skills.

    As a club we invest in this passion and have put more riders through the ACU Club Coach coarse than any other. We are proud of this and the results are better riders from the offset and less red and yellow flags.

    Not everyone cuts the mustard as a Bemsee Instructor but if you meet the criteria below and want to become a Bemsee Instructor please drop an email to myself at Jeremy@Bemsee.net and Tracey@Bemsee.net and we will look at getting you on the next course over the Rookie school weekend 22/23rd Feb.

    Criteria:

    Passion and the "want" to be an instructor

    Calm nature

    Good listener

    Good communicator

    A minimum of 3 full seasons experience (top ten finishes)

    Commitment to Instruction on Race Friday Test Days

    Fun and enthusiastic to help others

    The reward for all this? To see the riders you instruct reach levels of ability they never thought possible on a race track. Its amazing!

    Tracey and I look forward to the welcoming the new members of an already, incredible group of Bemsee Instructors, who give so much to other Bemsee riders.

    %d comments

      Attachment Unavailable — Yamaha FZ6R Owners

      This attachment may have been removed or the person who shared it may not have permission to share it with you.

      %d comments
      • I just took my exhaust system off and took it up to my muffler shop and had him cut a couple baffles out and get the bend out and it sounds great, I just posted a video on here if anyone is interested in hearing it

      • Yes Joseph, would love to hear a video of it,, and pics of the work done and how it was done if u have any,.,

      • Well I didnt take any pics of it getting done. I just took off the side fairings, unbolted the headers, and the two exhaust mounts. Took it to the shop he cut two holes in the top, cut a hole next to the converter thats in the muffler and cut out a couple baffels then re-welded it back up. And I just put it all back up underneath the bike. Big deal to make sure the headers are good and tight to the block and each port has its little gasket ring inside it before u fit it back on there. Put bike back together and ur good to go

      Bad morning — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

      Bad morning...

      The more na nag iingat ka sa daan. Ang kasalubong mo naman Hindi. Labas ko lang sama ng loob ko mga ksmx. Me and my wife almost close to collide into a Honda jazz and a 16 wheeler truck. Wheeew! peste kang jazz ka liit mo, Hindi ka naman kamahalin lakas mo sakupin right way ko. At close front distance pa. Nalaglag puso ng wife ko. Buti nalang naiwas ko at nailagan ko ang truck.. Kung ako lang mag isa. Hahabulin kits hangang dulo ng mariveles. At sure dika na makakabalik pa pauwi. Para madala ka. At mag commute ka nalang for sure. P.I ka..... Okay na mga ksmx..good day po..

      %d comments

        Cristian Wtx shared a Page to the group: Yamaha TDM 850 Club. — Yamaha TDM 850 Forum

        Hi Friends !!!

        Announce that we just started a contest of pictures of TDM.

        Come on Yamaha TDM's Facebook page to register for the contest or to sustain your friends !!!

        To join the contest you just need to post a picture of your TDM in Yamaha TDM Community's timeline.

        Already enrolled in the contest owners from the USA, Argentina, Singapore, England, Romania, Greece, Italy and many, many other countries.

        Please give us a LIKE on our Facebook page.

        Thanks.

        Yamaha TDM Community's TEAM

        PS: The prizes are waiting for you !!!

        %d comments

          Anyone want to have a get together in IL here in Feb No bikes obviously but we... — Yamaha Stryker Owners

          Anyone want to have a get together in IL here in Feb? No bikes, obviously - but we could have a weekend long event.

          %d comments
          • I'm not sure, i'm waiting to hear from Beth Reece on her weekend off too. if nothing else, we can just have a small one Patrice :)

          • If I get anyone sweet talked into swapping shifts with me Sat and Sun I'll let y'all know... I'm trying! Lol maybe if I sweeten the offer with a bear roast and a made from scratch cheesecake....

          • if anyone could pull the sweet talk off , you can do it Beth

          Photos from Alu Card's post — Yamaha C3

          je pleure mon scooter je me suis fait percuter par une voiture le 27 décembre et je suis 100% non responsable, il est épave et l assurance me rembourse que 500 euro alors je l ai payer 1300 euro il y a 1an et demi sans compter les pièces que j ai remises dessus les boules :'(

          I cry my scooter ,I was collided by a car on December 27th and I am not responsible 100 %

          It is wreck and the insurance pays off to me only 500 euros :(

          Then I paid him 1300 euros 1 and a half year ago.

          Without counting the rooms(parts,plays) which I put back(handed) above

          I am disgusted

          %d comments
          • Also, If you have a Legal Aid Society...That provides no cost Legal services...

          • Gabe, it looks like over there if you get insurance money, even not enough to replace it, they take the damaged vehicle away to be destroyed and you can't keep or resell the parts.

          • Ramon, ici, vous recevez un chèque pour les réparations fondées sur une évaluation professionnelle. Comment vous décidez d'utiliser au mieux les fonds est votre choix.

          REVISI UNDANGAN GUMIC INFO — YMJT (YAMAHA MIO JAWA TIMUR)

          REVISI UNDANGAN * GUMIC INFO *

          Salam satu Aspal "GUMIC"(Gubug Matic Community). Mengundang seluruh Club Mio Matic Area plat "K" & Biker's Mio Matic di Acara "ANNIVERSARY GUMIC" yg d selenggarakan pada: Hari / Tgl : Sbtu,18/01/14. Jam. : 19.00-selesai.. Depan YAMAHA HARPINDO-GUBUG Acara :

          1.Anniversary GUMIC yg ke-1 Thn 2.KOPDAR GAB MIO AREA "K" 3.Syukuran..

          penjemputan di Bunderan GUBUG..

          Terimakasih.

          Ketua; "GUMIC#001.LEKSONO".

          CP penjemputan:

          Wil ;

          =>TIMUR. Sdra ;ARI (085740129118)

          =>BARAT. Sdra ; EKO(085641202099)

          =>SELATAN. Sdra; EDO(085865001221), salam satu aspal dari kami. GUMIC#001.leksono

          NB. :> walau kita gak sedarah & seatap :> tetapi kita satu keluarga & satu tujuan...........

          %d comments
          • Deniie Mio Plat AE@ slm saodara stu tujuan............gas jateng pak

          • solid selalu,,maaf mgkn rekan2 YMJT blm bisa hadir krn tgl 19 berbenturan dngn Kopdar Plat P

          • Edwin Siangmalamtunggupanggilan}@ oh ya gpp pak sukses zlalu buat sobat" YMJT ne q jg ru plg dr jatim blitar pak....

          eto po ung lagatik sa makina q. anu po kaya salution jan. tnx mga kasniper — Yamaha Sniper 135 Classic

          eto po ung lagatik sa makina q.. anu po kaya salution jan? tnx mga kasniper

          sniper MC

          Stock engine po

          %d comments
          • Piston pin or connecting rod. ..dapat pabuksan mo na para ma chech ..kci pag pinabayaan mo mas lalaki gastos mo marami masisira. .

          • Tensioner paps..npaadjust mo naba?

          • tensioner nga tama c #jay f ortiz

          Jim Loosli shared a link to the group: YAMAHA PICS/MODIFICATIONS. — YAMAHA PICS MODIFICATIONS

          I've been seeing & hearing a lot of comments why everyone is changing the seat(s) on they're Star and it's almost always "cause the stock seat is too hard & uncomfortable"....... That I can understand, but did they change things for the better at some point ?. Idk if this is an OEM seat (pretty sure it is) but its soft, supple and comfortable. Just wanted to ask. Trying to get an idea of changes & modifications from year to year . Thanks .....

          %d comments
          • I live close enough to www.meancitycycles.com to have dropped my seat off for a rebuild. It was a lot cheaper than buying a $600 seat. It is comfortable.

          • Mine is actually comfortable for local riding, because I am generally putting my feet down enough to relieve pressure. For that, its more than adequate. On long trips, where I hit 60 miles or the more without stopping, that's when I have to start changing positions.

            I just ordered and installed a d.I.y. saddle gel kit, but have only gotten 1 50 mile ride in since doing so. So far, its hard to tell a difference, because it was already comfortable on the short trips. When I start again on the 1000+ mile weekends, I will surely have an opinion..

            Its a damn shame that we can't try these things out BEFORE buying them. The only option to doing that is to swap seats/bikes with a buddy for a day.

          • My seat modification entailed removal of some of the stock foam, cut out a channel for the tail bone and add a layer of memory foam. This made a big improvement in comfort.

          Jim Loosli shared a link to the group: Yamaha V-Star riders. — Yamaha V-Star riders

          I've been seeing & hearing a lot of comments why everyone is changing the seat(s) on they're Star and it's almost always "cause the stock seat is too hard & uncomfortable"....... That I can understand, but did they change things for the better at some point ?. Idk if this is an OEM seat (pretty sure it is) but its soft, supple and comfortable. Just wanted to ask. Trying to get an idea of changes & modifications from year to year . Thanks .....

          I've been seeing & hearing a lot of comments why everyone is changing the seat(s) on they're Star and it's almost always "cause the stock seat is too hard & uncomfortable"....... That I can understand, but did they change things for the better at some point ?. Idk if this is an OEM seat (pretty sure it is) but its soft, supple and comfortable. Just wanted to ask. Trying to get an idea of changes & modifications from year to year . Thanks .....

          %d comments

            Mga sir tanong ko lang kung sino nakakarelate dito gusto malaman kung sino ung... — Yamaha Mio Mx 125 Parking Lot

            Mga sir tanong ko lang kung sino nakakarelate dito.gusto malaman kung sino ung mabait na team natin na tumulong sa knila. ni messages lang skin ng tropa ko -------Pre Pasuyo naman ako sa grupo nyo. Pa pose naman patanung nung pangalan nung tumulong na dalawang ka grupo nyo sa grupo namin nung linggo. Bandang tanay rizal proper paakyat ng marilaque. Hindi kasi namin nakuha pangalan. tnx pre

            %d comments
            • natulo luha ko habang binabasa ko to.huhuhu....makasali nga s TMMX125!:-)

            • sana mameet ko din ung matangkad at maliit at matangos ang ilong!:-P

            • Hahaha... kung wala lng aq pasok mgstay pa sna kmi hanggat mging ok na ung motor, kso nahihiya kmi kunin ung tools bka ksi need pa nila, balak na nga iwan ni papa Michael Aganon ung tools nya, kso baka kmi nman masiraan pauwi.sensya npo tlga need npo umalis dat time...

            Please Read First. Thx — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

            Please Read First! Thx!

            Package Deal:

            Fox Body Armor + Knee Pads + Gloves = 2,500 php ( add 500 for shipping fee)

            (All items are BRANDNEW)

            If sold separately: (shipping fee included)

            -Fox body armor 1,350php

            (Available sizes L, XL, XXL)

            -MKT Knee pads 1,350php

            -Gloves (MKT) 650php

            Free delivery within Davao city.

            For Davao area pm me for the price.

            For faster transactions please call/text: 09434941515

            Or visit: Driftworx carwash at Blk10 lot1 ruby corner coral st., marfori heights subdivision, Davao city (Please Respect my post thx)

            %d comments

              This morning. Me and my wife late for work. I noticed a rider 150 ahead of us — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

              This morning. Me and my wife late for work., I noticed a rider 150 ahead of us. We are at 110 speed. As we get closer to him I saw his side stand na nakababa. Nagbusina ako at nag sensyas sa kanya. Nilingon nya ako. Hindi nya na get sensyas ko. Hiniritan ako ng pagkabilis. As same road user at possible sya mag trip at madisgrasya. Hinabol namin. Diko na alintana speed meron kami dalawa. Inabutan ko sa harap. As a likod ko sya . sumenyas ako sa stand ko. At dun lang nya nakita ang side stand nya. Tumaas kamay nya after. Sa side mirror ko nalang nakita at nagbusina.. Need ko pa habulin para makita nya.. Yan ang safe na sumibak. May reason. Heheh. Good day ksmx.

              %d comments

                Is anyone else having problems getting on the site — YAMAHA JETBOATERS

                Is anyone else having problems getting on the site?

                %d comments
                • You might need to clear your cookies and restart, there are no issues we are aware of... U can also email brd-75 your IP addrss and time the issue occurred and he can check with the host

                • Thanks! Just shot him a Facebook msg!

                • L I'll male sure he gets it

                1997 350 warrior completely custom rebuilt from the ground up custom paint all... — Yamaha Warrior Raptor YFM350

                1997 350 warrior completely custom rebuilt from the ground up custom paint all new bearings and bushings K&n air filter bored .20 over with 12.5:1 high compression prolight piston new valves new valve springs new vale guides and seals new rocker arms wiesco crank fmf megamax 2 exhaust new chain whole complete extra set of wheels and tires 5 extra shocks 2 extra sprockets skid plates air filter extra cases stators extra clutch cable all kinda of extra stuff and unlike most warrior this one has a clear Tittle like to sell 1000$ obo or trade for a nice kx 125 rm 125 or yz 125 or 250 4 stroke bike or a good running 400 ex located in Jacksboro TN

                %d comments

                  Photos from Fred Greenlee's post — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

                  68f degrees in South Central Kansas today. Could not pass up an afternoon of riding.

                  %d comments
                  • Corbin's can be magic; I've had several and all of them but one were great additions.

                  • The Gunfighter and Lady I have for the white FJ has Leather seating areas. Quite a bit firmer than the Vinyl covered Gunfighter on the black FJ. I am considering getting it recovered with all vinyl.

                  • Tom's Upholstery in Topeka did my Gunfighter and he gave it a better finish than it had originally from Corbin. He's right next to Extreme Cycle in north Topeka, he's a motorcyclist and a good guy. Drop my name if you decide to go up.

                  Question for those in the know Do the number boards and numbers have to... — Yamaha Past Masters Racing Forum

                  Question for those in the know....... Do the number boards and numbers have to mounted on the seat or can they be mounted on the side of the fairing? It seems the norm to have numbers on the tail but was thinking of maybe trying something different.

                  %d comments
                  • thanks boys, just an idea we were chatting about at the weekend. The green background will still be there as per the regs. It may look gash when we try it but just wanted to be sure I wasn't violating the rules in any way.

                  • Didn't the classics used to run with numbers on the fairing

                  • As long as marshalls etc can clearly see from side and front your number incase we need to call in your number etc

                  mga ka snipey anu po ba pwedeng mangyare sa sniper naten kpag nka open curb tau — Yamaha Sniper 135 Classic

                  mga ka snipey anu po ba pwedeng mangyare sa sniper naten kpag nka open curb tau??? mka2sama ba sa sniper naten?... tnx po sa mka2sagot..

                  %d comments
                  • Wla nman cguro mngyayari sa sniper ntin pg wla filter..tagal na ako nka open carb at ilang palit na ako ng open carb ok prin nman sniper q.

                  • San m ba bnbyahe sniper m? D naman mssira ng gnun gnun pero mas pnapaikli lang yung life span

                  • araw2 sir sa skul lng from san mateo to qc

                  Question. anu ang mortal na kalaban nang sniper pag dating sa drag race — Yamaha Sniper 135 Classic

                  Question.. anu ang mortal na kalaban nang sniper pag dating sa drag race?

                  A. TMX 155

                  B. BARAKO 175

                  C. RAIDER 150

                  D. MIO

                  %d comments
                  • pero walang rivalry.. :D

                  • r150 STROKE 62.0 mm X 48.8 mm snipy Bore & stroke 54.0mm x 58.7mm

                  • Sniper for circuit, Raider for drag... yun ang alam ko.

                    lahat ba ng motor pag na nalagyan ng magandang set up ay magandang i-pang drag race, same as lahat ba ng motor ay magandang ipang circuit?

                  Mga sir suggest kayo ng best sprocket combination para sa all stock snipee... — Yamaha Sniper 135 Classic

                  Mga sir suggest kayo ng best sprocket combination para sa all stock snipee classic nten.!! TIA. :)

                  %d comments
                  • kung mx gmit nio suggest ko 14 41 pr may pan dulo p ang kinta nio.....pero alam nio b n ang 4th at 5th gear ng mx e pareho lng ng teeth ng gear..ky kung iisipin n madadadagn ns speed kpag nagkinta ay NDI.rest lang para ma lessen lang ang vibration

                  • oo nga kasi ang 3rd gear ng mx hanggang 80kph lng yata while ang classic aabot 100kph... pro classic ako paps nka mx rear mags lng

                  • Sakin for stock 15/40 to 42 pkay circuit type 415 na sss good sya uphill and acceleration pero my dulo

                  Just got back from a long day of transiting to from the Zumstiens near Halls... — Yamaha FZ6R Owners

                  Just got back from a long day of transiting to & from the Zumstiens near Halls Gap..all to ride a 30km stretch of road between halls gap& Wartook.

                  My thoughts on the road:

                  Excellent surface for the most part.

                  85% corner ratio was soo good!

                  Sheer cliff drops on the roadside is a bit scarey.

                  The view is amazing.

                  Twisty carvers heaven!

                  On the downside, only a handful of corners have a recommended speed marker..quite poor as many of the corners become sharp steeply cambered decreasing radius turns at the apex, which are not in view until almost at the apex..very deceptive & treacherous.

                  I think I've found my favorite bit of road!

                  %d comments
                  • I think so, there were a few tourist stops.

                    That road is a real motherfucker.

                    It's beautiful, but the lack of corner speed markers combined with very nasty hidden decreasing ratio turns at the corner apex & sheer cliff drops give very little room for error, even at the quite sedate pace I was doing.

                  • Yup, hellish long way to go for a 30 K ride though,,, we usually go up to halls gap and stay the night in a cabin,.,, quite cheap

                  • 60km actual, next time I'll do 3-4 runs thru that road.

                  Mitchell Chapman shared a link to the group: Yamaha FZ6R Owners. — Yamaha FZ6R Owners

                  https://www.facebook.com/photo.php?v=1991030336237 40

                  Worth the watch ! Would hate to be living in qld these days !!!

                  "How many friends do you have?" We have got to be kidding where our Police think they have a right to ask u crap like that!

                  %d comments
                  • They have an afilition with the US and UK clubs

                  • A couple of major points that worry me;

                    1) the amount of police power spent on this one bloke, on a bike in a servo doing zilch wrong besides riding a Harley.

                    I guarantee there is a crime happening somewhere close by where at least 3 of those cars could be attending.

                    2) the audacity of the officers in asking how many friends he has, how much he paid for the bike etc, that is personal information that they ( police) have no right to ask for,

                    The intimidation and questions asked borders on Nazi Germany FFS! Mate wear this yellow patch now so we can identify you and your people!? Seriously wrong!

                  My YZ throwing down some passes in my last GNCC — Yamaha YZ250 2-stroke

                  My YZ throwing down some passes in my last GNCC.

                  %d comments
                  • Get them all Scotty.... GO BLUE! :D

                    ....You seem to have a Husky too. How'd you find them? i just got to ride one Husky TC250 way back 2009 while i was working in Spain. Quite some torque from that bike eh! ;)

                    Have you seen the KTM Freeride 250R yet there? It got a 23-hp 2-stroke motor that doesn't use a power valve system, built purposely as a trail bike. It comes also with a low seat height, 36-inch against our YZ's 39.1-inch seat heights and weighs less at 92-kg dry.... The YZ250 aluminium stands at 96-kg dry.

                  • Hey Kiko, thanks buddie! The Husky, I have is a 510 SMR with the factory power up kit installed. It is an absolute riot to ride on the streets! I have seen the freerides, they're really nice. I'm actually leaning towards buying the new Husqvarna TE 300 or a Beta 300 RR. Decisions, decisions. Keeping my YZ though!

                  • You should keep it man! ;)

                    They're becoming quite a character bike now as Yamaha's stubborness not to change 'em and just continue making them is printed and impressed all over the bike. That's why i love them YZ's buddy!!!! :D

                  What s everyone s take on power shifting Shifting up without clutch Many... — Yamaha FZ6R Owners

                  What's everyone's take on power shifting? Shifting up without clutch. Many online say it's totally fine and won't damage transmission.

                  %d comments
                  • Yea I would not recommend it if you're new to riding. Everywhere in the motorcycle community, you will get mixed opinions on many topics. Try and put sport riders and cruiser riders in the same room and ask which is better.... Just sit back, crack a beer and watch the brawl

                  • Something I read in the Fz6r owner manual - Always use the clutch while changing gears to avoid damaging the engine, transmission, and drive train, which are NOT designed to withstand the shock of forced shifting. There we have it! :p

                  • ^^^

                    Budget bike

                  Mga papa pwede ba izero gasket ang mx natin Tapos cams lang Magnda kaya... — Yamaha Mio Mx 125 Parking Lot

                  Mga papa pwede ba izero gasket ang mx natin? Tapos cams lang? Magnda kaya performance? Thanks.

                  %d comments
                  • pa o.t po. kc sir Jason, nakapagtanung ako mas good daw kung higher cams? pero anu naman ang masasabi mo sa 5.5 lift na cams? any feedback po

                  • bili ka ng rocker arm sa 3S 300 petot ata yung isa diko na matandaan, pakabit mo nlang sa trusted mechanic mo.

                  • regarding Hi-Lift cams hindi ganon porket nakaHi-Lift na mas maganda na tumakbo, minamatch kasi yan sa set-up ng makina mo boss. basta pagmataas ang lift ng cams bumaba compression ng makina. yung stock cams ng mx nasa 4mm lang yata yung lift. kung all stock ok na yung J5 na 5.0 nag lift. take note lang din na gang 6mm lang na lift ng volt-on higher than 6mm may tatabasan kana para hindi tumama sa valve seal ang retainer ng valve spring.

                  salamat po sa laht ng nag text at nakisimpatya kahapon kay papz Amigo Amiga na... — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

                  salamat po sa laht ng nag text at nakisimpatya kahapon kay papz Amigo Amiga na nag effort sa pag hatak sa amin ni mx pauwi.. kay vice SeSe Aguinaldo para sa pag tanggal ng sparkplg pagkabit ng fairings...kay papz Alexis ToLedo sa pag sira ng kill switch ko eheheh chairman Aries ProTaper pag tali nang lubid sa amin ni amigo... kay Al Sarmiento Lopez para sa pag hawak ng helmet ko dahil may tirador sa gedli! Shernan Mendoza na taga ilaw namin at sa lahat po ng nag paiwan at huminto para maki usyoso este tumulong mga papz! salamat sa inyong lahat! okie na kame ni mx ngayon! maraming salamt kay master Ronald Escanilla para sa grabeng effort umaga palang inumpisahan na namin at around 2pm kame natapos! pic. to follow papz! salamat sa lahat!

                  %d comments

                    Aaron Carlo Arcilla Bernabe added 24 photos to Seamless Wear Multi Scarf Magic Head kerchief in Yamaha Sniper MX 135/150i Owners (SniperMX Philippines Visitors Page). — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

                    Price: 120 each

                    RFS: Seller

                    Location: Muntinlupa City

                    Contact#: 09155578365 (for fast transaction)

                    Product Features:

                    Fashionable multi scarf for both men and women

                    Can be used as neckerchief, headbands, foulard, scarf, mask, wristband and so on

                    Breathable, sweat and moisture absorption, wind resistant

                    Washable and reusable

                    Design your next amazing look with this scarf

                    Size: 450 x 240 x 1 mm / 17.72 x 9.45 x 0.04 inch

                    Net Weight: 28 g / 0.99 oz

                    Mode of Payment

                    BDO, LBC, Cebuana

                    NOTE: For the depositors...Kindly send us a copy or picture of your deposit slip for us to know immediately your payment.

                    TERMS AND CONDITIONS :

                    No bogus buyer, No cancellation of orders...

                    Shipping fee shouldered by the buyer.

                    Shipping rate may vary depends on the weight of the items and the location of the buyer...

                    Your order will be shipped upon receiving your payment confirmation.

                    Items will be delivered upon buyers choice of shipment.

                    Via JRS Express

                    Luzon Rate: 1pc- 90pesos, 2 to 5pcs- 110pesos

                    Visayas Rate: 1pc 100pesos, 2 to 5pcs- 115pesos

                    Mindanao Rate: 1pc- 110pesos, 2 to 5pcs- 120pesos

                    Meet ups around Muntinlupa City only.

                    We accept bulk order.

                    Thank you!

                    %d comments

                      Nagpapasalamat ako sa lahat ng nakasama kagabi sa meeting sa Yzone Una sa... — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

                      Nagpapasalamat ako sa lahat ng nakasama kagabi sa meeting sa Yzone.Una sa lahat sa Diyos dahil safe akong nakabyahe kahit masama ang panahon.Second sa wife ko dahil pinayagan ako :) pangatlo sa President ng SMX Phil.kay Sir Amigo na napakabait sakin.Kina Sir Ferdie Sir teody at sa mga East Side na nakarides ko sa Lucban na nakita ko ulit kagabi.Kay Sir llave rin at sa lahat ng mga nakausap ko.Salamat sa inyo dahil ngayon ay naging ganap na akong member ng SMX Phil.Isa ito sa hindi ko makakalimutang araw na dumaan sa buhay ko.Long Live SMX Phil.Ride Safe mga Sir :)

                      %d comments