Photos from Marcelo Balboa Urashima's post — Yamaha Virago 535

Yamaha Virago 250 1998

. YAMAHA - XV Virago 250cc 1998 - no estado que se encontra

. documento ok - recibo em branco

. cor preta

. pneus semi novos

. bateria nova

ACESSÓRIOS

. sissybar alongado

. mata cachorro

. som mp3 com alarme

. escapamento esportivo

. jogo de setas balinha

. baterria nova

. regulador de voltagem novo

. caixa de direção novo

À vista: R$ 8.500,00

.dispenso curiosos

.aceito proposta

.estudo troca por moto de maior valor (600cc) ou carro automático

.valor de troca R$ 9.500,00.

TELEFONE (011) 982210769 vivo

0 comments

Mga Guys may issue nanaman sa group natin at sa Raider150 mga paps hiling ko... — Yamaha Sniper 135 Classic

Mga Guys! may issue nanaman sa group natin at sa Raider150.. mga paps, hiling ko lang sana magkasundo na tayo, dahil parepareho lang tayo mga Riders. okaya magusap tayo at mga raider na, magkaayos na pagusapan ng maayos at wag yung magbibitaw tayo ng mga hindi magagandang salita, at saka guys, sana matuto tayong magpakumbaba. laging tandaan na magkakapatid tayong mga riders, ALLBRAND. mga guys pasensya na nakielam ako. pero sana magkaayos na. God bless us all. Ridesafe mga kasniper.

10 comments
  • oo po sir e. kaya sabi ko. matuto tayong magpakumbaba. ako tanggap ko na kahit pa ikarera kahit saan, stock sa stock talo sniper ko sa r150. hehe. :)

  • Basta RESPETO sa bawat isa sa kalsada.....

  • Oo nga mga boss tama kayo Nathaniel Tanedo Mark Lester Looney Tunes

Photos from Ross Berenchtein's post — Yamaha FZ6R Owners

guys i have a question.. I just installed a juicebox and block off plates, the bike is a bit more louder at the front is this normal?

10 comments
  • JB is easy to use and tinker with on a basic level. Nothing wrong with it and was my choice to buy over the PC

  • PCV FTW!!!!!! Love mine and love Marthy's Advance Gear Rev B map. Puts all the manufacturer maps to shame.

  • Not to mention cool settings like Accel pump for a nice boost. Lots of tinkering can be done with PCV.

Elvin Gomez Dominguez shared a link to the group: Yamaha Sniper 135 Classic. — Yamaha Sniper 135 Classic

believe ako d2.. sibak ang krr.

10 comments
  • cge karga pa !! :D

  • 160 cc ata jn c kimredbull..ngayon mas mamaw n lalo..nka 62 n ata sya big valve,180+cc n ata.sana my part two na cla sir traxxas kimredbull at mga gensan upper valley boys with cnr allstar ng davao.lupit din mga set ng cnr allstar dumadapa,mga 180cc mga raider nila kht ke sir kimredbull 160cc that time tlgang sumasabay sa raider.waswas mode!di nagpapaiwan khit underspec sya.kya ngayon mgnda kungy part two.150 cc plng si sir trax(spamsafe)ngayon mga nka 62 at superhead cla.

    Calling sir job,Traxxas Modifier ang kimredbull part 2 pls...dami mag aabang nyan sa yamaha t135.com

  • sibak!!!!

These plastic side covers will get a splash off yellow soon — Enduro Yamaha IT Series

These plastic side covers will get a splash off yellow soon!

2 comments
  • I used sheets of yellow sticker when I did mine.

  • I was undecided what to do, as you said with sticker or paint. I went with paint as I took it to a friend I know at a crash repair shop with my IT 175 K panels. I am getting paint again for the J model as I was very happy with the paint. They used the proper paint that sticks to plastic.

ALAT REVOLUSIONER — YMJT (YAMAHA MIO JAWA TIMUR)

ALAT REVOLUSIONER

UNTUK MOTOR DAN

MOBIL ANDA

"SAATNYA ANDA

MERASAKAN KECEPATAN

DAN AKSELERASI

SEBENARNYA DARI

MOTOR DAN MOBIL

ANDA"

Terobosan bagi Anda

pemilik Motor/Mobil baik

itu 2 tak, 4 tak ataupun

Matic.

HUMAN CAN RESEARH

Telah berhasil membuat

membuat alat yang

bernama 9Power. 9Power

adalah alat sederhana

yang memiliki

kemampuan super.

Dengan alat ini motor/

mobil anda akan memiliki

"maximum performa"

Apa keunggulan 9power?

Bisa digunakan di Motor/

Mobil jenis 2 tak, 4 tak &

Matic.

Memaksimalkan

Aksel erasi, Power, dan

Speed

Pengapian lebih cepat

dan bagus.

Hemat BBM (karena

pembakaran lebih cepat

dan bagus).

Bebas perawatan, tahan

api (panas mesin) dan air

(hujan/saat mencuci

motor).

Plug n Go, pasang 9Power

maka Anda akan

langsung merasakan

efeknya tanpa perlu

setting yang lain.

Bagaimana Cara Kerja

9Power?

Cara kerja 9power yaitu

menstabilkan arus listrik

yang dihasilkan oleh koil

(kita tidak tahu koil

tersebut tegangannya

naik, turun, atau stabil).

Nah, untuk mendapatkan

pembakaran yang

sempurna arus tersebut

harus stabil. 9power

menghilangkan frekuensi

yang liar dan

mempersempit/

memperfocus frekuensi

arus listrik di dalam kabel

busi sehingga menjadi

satu titik tembak ke busi

dan api yang dihasilkan

tidak menyebar

melainkan menjadi satu

kesatuan yang tajam dan

kuat. 9power juga ikut

mendorong arus tersebut,

sehingga 9power bisa

dikatakan sebagai

booster dan penguat

arus.

Pembakaran bagus,

ledakan bunga api bagus

sehingga tidak ada bensin

yang terbuang percuma

(kami berani jamin

sebesar 98% bensin

terbakar sempurna tidak

ada yang 100% karena

terjadi sangat cepat,

motor masih baru keluar

dari pabrik saja hanya

sebesar 92%-95%).

Kerja piston menjadi

tidak berat dan berirama

stabil naik turun tidak

kaget-kagetan makanya

akselerasi tanbah

mantap.

Berapa harganya?

Harga: Rp.50.000,-

Kondisi Barang: New

Cara Pembayaran:

Transfer Bank

Info Order: 087805753877

Lokasi: Sumedang

Terima Kasih.

10 comments
  • alamat lengkapnya dimana? Buat nanyain ongkir ke JNE

  • jl.Duren no.17 surabaya.kd pos 60136 Tambaksari

  • kecamatannya apa boss?

Right so I cleaned the carby fiddled with it abit she started first kick went... — Enduro Yamaha IT Series

Right so I cleaned the carby fiddled with it abit she started first kick went to let it idle then she died started her again and it acted like it was out of fuel and died went to start it again and it back fired really bad???

4 comments
  • backfire makes me think the spark might be mistimed...but try this. take the plug off the engine, keep it plugged in to the plug boot, ground the threads and kick it over by hand to see what kind of spark you have on the plug. if its a nice fat bright spark, then at least you have a good coil. Then check fuel

  • Is the fuel old? been sitting around for too long? Bad gas can make a bike act funny too. If the gas is good and pre-mix is right, then theck for cracks in your intake boot. (Carb to engine) If you get air in there it will lean out the mixture.

  • And if all that checks out,cehck for loose or shorted wires from the stator to the CDI and to your coil. You can also pull the stator cover off & see if anything got loose in there. If the timing plate screws got loose that could be an issue with spark at the wrong time. You might have to pull the flywheel off (special tool) to really see the timing plate.

  • Annnnd finally...about 20 years ago my CDI unit died. Odd spark, no spark, wouldnt run.... Had to scource a junkyard one and it fired right up. Good luck man, it can be frustrating, but when you get it running it's all worth it!

Does anybody on here have a good link or able to message or email me the file... — Yamaha Warrior Raptor YFM350

Does anybody on here have a good link or able to message or email me the file for a repair manual for an 03 warrior? Seems like I search and search and can never find what I need.

10 comments
  • Sweet. Idk why I couldn't find it. But I downloaded it and it works. Thanks guys very much for your time.

  • Well once ive looked through that I realized that it doesn't tell what year. And I know its definitely not 2003 because my colors of wiring are all way different then whats in here.

  • search on google for 03 yamaha yfm350 repair manual pdf and download the pdf file one thats wat i had to do and u also need a pdf file reader

Paul Stewart uploaded a file in the group: Yamaha C3 . — Yamaha C3

http://www.wholesalecarkeys.ne t/black-folding-magnetic-key-b lank-with-right-blade-for-yama ha-esw-motorcycles.html

Black Folding Magnetic Key Blank with Right Blade for Yamaha ESW Motorcycles.

Magnetic Key Blank with right blade for Yamaha

uncut blade: Length: 48mm, Width: 9mm

blade type: folding, flip

Color: Black

Material of key blade: Copper.

the key listing comes with 3 magnets which can be added to the key as a DIY project.

10 comments
  • I did forget the gas cap.... But I'm not the one looking for a key anyway.

  • I don't need one either, I just know it's hard to find a key with the shield cover attachment.

  • I forgot about this post/thread, but see my results posted in a thread above, started by Fabrice and the other key he used. Long story short, the key linked above from wholesalecarkeys will not work with the hexagonal head lock cover feature, due to the magnet slot pattern being different. I'll also mention that my OEM key also has three magnets, but one has a different polarity - keep that in mind if you try reproducing the magnet arrangement.

Race School is over for 2014. — Yamaha Past Masters Racing Forum

Race School is over for 2014 :-(

This year has just been amazing with some brilliant rookies and, I have to say, some outstanding Instructors.

In summary:

Saturday included;

Marshal training, Tech training, ACU Club Coach training and of course rookies training incorporating hundreds of people. All running simultaneously and all running smoothly.

Sunday saw the on track action for Rookie assessments. Most of you wouldn't have known we had the ACU observing the instructors and how the race school was run. They mentioned they had been to a race school event the previous week where 32 rookies were assessed and it was a little unorganised and problematic. When they found out out we had over 100 rookies out on track with 32 instructors there was a gasp! But you know what........ there was nothing but praise at the end of the day because you all made it work so well.

That is Bemsee at its best and thanks to everyone who played a part in such a brilliant day. The weather was tricky in the morning and despite catching a few out everyone rode so sensibly. The races starts were brilliant with some great control and enthusiasm.

For you new rookies, we are very proud you chose Bemsee to race with and you will have an incredible year.

To the Marshals, Medics, Techs, officials and ESPECIALLY the Instructors (where not one fell off!), You are simply the best (Queue the Tina Turner song)) :-)

See you all at the first race meeting back at Brands in April where the Bemsee fun continues for 2014! Wohoooo

0 comments

anyone here have an customized IT — Enduro Yamaha IT Series

anyone here have an customized IT?

4 comments
  • Moose racing handle bar and hand gaurd set up if that counts. Also thinking of making a disk brake conversion from an old rm125 I picked up. - IT250K

  • Unfinished project #237.

  • I'm gonna go all out. Different paint job, sidecovers, stickers, the works. It's gonna be a IT just by heart.

  • how difficult is the disc brake conversion? Could defnetly do with more stopping power on my 425

still searching for a good ytm 200 recoil — Yamaha YTM Three Wheeler Forum

still searching for a good ytm 200 recoil

10 comments
  • Not really my tri z has been easy to find and reasonable prices

  • That's the one Yamaha trike I don't own. Actually, I have a Tri Z frame, rear carrier, axle, cooler, exhaust and wheels. It's on the list

  • Matter of fact, it is exactly like yours.

Craig Ovadia shared a link to the group: Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT -. — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

I wonder what my bike is worth? Not that I'm selling :-D

9 comments
  • No issues yet I've heard that could be an issue

  • Mine does occassionally usually when i'm doing the traffic light gp and snick rather than kick it into 2nd lol

  • I've had it go in the middle of 1st and 2nd once but never again I always throw a small rev on down shift makes everything smooth

share ko lng mga papi knna pagkauvve galing vvork mron akong nakasabay s stop... — Yamaha Sniper 135 Classic

share ko lng mga papi....knna pagkauvve galing vvork mron akong nakasabay s stop lyt ng JRU.hbng nagaantay km ng grin lyt naitanonjg ko s rider ung mc nya....sabi ko PAPS AYAN B UNG BAGO NG RAIDER 150R.UNG FI?,..ang sabi ng rider OO PRE..sabi ko nmn AH OK GUAPO HUH...sabay rebulusyon ung rider ng R150...sa icp icp ko pag kinarera ko neto try ko sabayan...ANG YABANG MAGPATAKBO...ay hnd nmn puede kay SNIPEY nten yun.bakbakan mula mandaluyong hangang pasig kapitolyo...SIBAK ANG ANG MAYABANG N R150....sabay tabi saken at sabi nya for break in palang motor ko at bago plng.....SABAY SABI ULIT AKO...AH OK...sa icp icp ko ulit kinarera mu nga ako,tus ung sinibak kita sasabihin mu for break in motor mu.....pakyu!ang sabihin mu sibak kalng.at mron pa tinanong nya SNIPEY KO.KARGADO YAN NOH?SABI KO,HNDI PAPS STOCK LANG...SABAY APIR....THANKS admin.paki delete ung hnd puede magpost ng ganto..MABUHAY TAU MGA SNIPER USER.

10 comments
  • delete nyo na to. dami nagaabang sakin sa labas. puro nka r150. bomba ng bomba!! hahaha. delete na hahaha

  • Hala kotong aabutin mo. hahaha

  • ops trending n nmn ahhhhh.....mron na r150fi......FYI lng po.punta kau s trabaho ko sa parkingan nmin mron nka paradang r150fi dun.....gusto nyo sabihin ko pa yung name ng may ari...hehehehe....TRENDING N NMN...hnd matanggap cguro ng kblng grupo n.......alam nyo na. PEACE!

Again on the EBS Billy Sheehan Pedal I discovered thanks guys that I can use... — YAMAHA Attitude Ltd

Again on the EBS Billy Sheehan Pedal: I discovered (thanks guys!) that I can use an ABY pedal to switch on and off the distorted channel keeping the clean loop always on.

Now it's time for the next step: do you think I can put a gain boost in the distorted loop and use it to have more volume when soloing? The idea is to have 3 main options:

1) Classic Sheehan Sound, the loops are both on;

2) Slap: only the clean loop is on (with some Eq);

3) Solos: same as 1, but with the gain boost engaged in the distorted signal (= more volume, more sustain, but the clean sound is always there, buried somewhere!)

10 comments
  • I was messin around with Jemini pedal in distortion loop. When I switched it on it would "eat up" all the tone from the ebs. Turning the level controls down on the Jemini turned down the entire signal when it was on.

  • That's true!, i was getting a lot of squeal with [adding other distortion pedals into the distortion loop, but there is something about the Boss SOD, no squeal. It'll be about a week, but i will shoot a vid showing the sound of it with the boss added.

  • Perhaps overdrive works better in the loop than distortion.

mga master ask lng po — Yamaha Sniper 135 Classic

mga master ask lng po...

o.k ba yung 14/40 or 16/40 na sprocket comination???

need some tips po...

9 comments
  • ok lng kaya to sa loaded bro yung 15/42

  • Ok ang 15/42 sa city driving kase mabilis umarangkada. (Y) pero kung touring depende sa set mo. Kung masyadong malakas motor mo try m smaller sprocket sa rear.

  • 14/42

Commission payout naman Commission from SWA MEMBER tru ML Kwarta padala... — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

Commission payout naman, Commission from SWA MEMBER tru ML Kwarta padala natanggap niya, one of my SWA Mates from Iligan humahataw sa swa in 5 days lang kumita na gamit ang kanyang facebook sa pag po post.... grabehh nato....swabogan na.

Want to earn extra income to full-time or part-time using Facebook or other social networking accounts you?

Includes are: Open for Employee, Unemployed, Student, Disability/Deaf people, Kids, Aboard (OFW), International (Foreigner people) and Hearing people, and Housewife CAN JOIN SWA!!!...

It's time to take charge of your finances. Walang yumamang empleyado. Pero Negosyante marami. Kaya gawan mo na ng paraan yang P2,500 Kaibigan!

> BE OPEN MINDED!

> GRAB THE OPPORTUNITY!

1st step is to ADD ME and Message mo ako

Ituturo ko sayo kung paanu KUMITA ONLINE

0 comments

Question. I have a 2001 V Star Classic and just need to replace the plugs — Yamaha V-Star riders

Question:I have a 2001 V-Star Classic and just need to replace the plugs(I'm pretty sure)However they(manufacturers) seem to have made this quite the chore.After removing the seat and taking off the gas tank I still can't find access to removing the header covers.Im very new to this bike but it shouldn't be such a chore....I am low on cash and this is my ONLY vehicle.....I can't load it up on my truck or trailer and take it to the dealership for servicing because A: I don't own a truck and B:I can't afford the service charge....Does anyone know of a way to access this?

0 comments

I was thinking to buy frim louis de one of these I there are owners that have... — Yamaha BT1100 Bulldog

I was thinking to buy frim louis.de one of these. I there are owners that have one of these please tell me your opinion if they are usefull or not? Thanks in advance!

10 comments
  • I've been doing some searching... Does anyone have something like this on his or her bike? Do you guys and girls think it would be possible, considering rain and such?

  • Forgot to attach a picture...

  • For those of you interested: http://prosportgauges.com

ا ن ا ل ل ه و ا ن ا ا ل ي ه ر ج ع و ن — YMJT (YAMAHA MIO JAWA TIMUR)

اِنّا لِلّهِ وَاِنّا اِلَيْهِ رَجِعُوْنَ

Telah Meninggal Dunia Saudara kita YAC NGANJUK Pak Marji jogotirto(Pak Tir) Desa Ngepeh.meninggal dunia mlm ini dikarenakan sakit.pemakaman Besuk pagi..

O:) Keluarga besar YAC NGANJUK memohonkan Mf jika selama beliu punya salah D̶̲̥̅̊ɪ̣̝̇ sengaja atau tidak D̶̲̥̅̊ɪ̣̝̇ sengaja.mari menundukan kepala sejena buat mendoakan almarhum Saudara kita YAC NGANJUK Pak MARJI Jogotirto( Pak Tir.

-AL-Fathekah O:)

آمِيّنْ... آمِيّنْ... يَ رَ بَّلْ عَلَمِيّنْ O:)

Jangan sampai putus doa rekan2 Bikers smua..

-Keluarga Besar YAC NGANJUK

- Keluarga Besar KOMIK Kediri

-keluarga besar T.M.C tulungagung

-

-

-

-

-

-

-

-

BC

0 comments

Here s my little beast as is right now an 82 I m a couple month away from... — Yamaha Virago XV 750

Here's my little beast as is right now, an '82. I'm a couple month away from stripping it right down to the frame and doing a cafe/fighter rebuild. I'm in the process of accumulating aftermarket parts and trying to solve the ever-so-popular "box-of-rocks" starter issue. I'm 'Iron Grudge' on the Virago Tech Forum, but I'd also love any advice and feedback from you guys as well! Cheers.

10 comments
  • I'll message you then diagram

  • The*

  • Right on, thanks guy.

Hi I have a 95 virago it running rich i ve lean my carb out it made it to lean... — Yamaha Virago XV 750

Hi..I have a 95 virago it running rich i've lean my carb out it made it to lean so I put it back where it was..back to rich again...also cleaned the carb an gas tank..tank was clean lookin.. so im here asking for some help..do u guys think the timing is off?..

10 comments
  • Good Luck!

  • HAV ETHE CARBS CLEANED SONICALLY This will remove ALL of the gunk from the microscopic prts and allow the F/A Mixture to settle down costs about 300 bucks at a good Bikke shop Honda of Knoxville did mine and the bike runs like brand new again

  • Thanks..

Overall — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

Overall

10 comments
  • yeah im still not sure which way to go, it'll need a spray either way lol

  • Yes I also do the stripes but can't get the gold colour as it's no longer available. Most people silver. The gold colour was $80. a metre supply only without cutting when it was available. I made the arrows from my Fj Bellypan.

  • Forgot to mention that they can be done in other colours if requested. The original gold is actually a pearl translucent colour. It's gold/ silver like the tank. If you look at the photo of my FJ you might be able to see the Bellypan stripe I made.

Photos from Rhoel Cruz's post — Yamaha Sniper 135 Classic

pagmerong lumalabas ng gasolina sa may red cicle pagnaggagasolina ka. ibig bang sabihin sira ng ung carb or pede pa to maayos. palitin na ba carb

ty

10 comments
  • mga paps... ganyan din ung akin. my regla n ung carb ko...

  • paps dpat ba magkadikit tlaga ung pump pra pag piniga ung throtle my gas kgad? ksi ung akin medyo mlayo kya pag piniga ung throtle prang delay ung pasok ng gas.. ksi di kgad sya tutukod.

  • pag bumili po kyo ng repair kit halos kumpleto na d lng kasama yong goma ng gas pump kailangan gumagana din yon halos walang gap yon at dag dag lakas ng motor yon dagdag gastos din hehe eto pamagat ng repair kit ng carb ng sniper bili ko 280 replacement lng KEYSTER CABORATOR PARTS japan daw hehe pero sakto sa lahat ng butas ng carb

So my IT won t start with the choke and when it is running as soon as I turn... — Enduro Yamaha IT Series

So my IT won't start with the choke and when it is running as soon as I turn the choke on she dies.....any ideas?

10 comments
  • Stock jets? If no mods to the carb id say its prob gunked up somewhere. Sometimes I have to take some small guitar string to my fuel circuits to clean out stuff the carb cleaner isn't getting.

  • take the carby apart and lay each piece in sequence so ya dont stuff putting it in the wrong hole..Clean completely with carby cleaner and blow thru with compressor. make note of numbers on jets etc thats what I did with all of my IT's, TY250 and now Sherco 250. Never had a problem after

  • I agree with Stuart , u must tear the carb all the way down , easy to do, be careful , do this in a pan, so nothing rolls off, carb cleaner, fine wire, lint free towels, and off you go.

Question about a Battery for my 2010 650 Classic I had my bike on a battery... — Yamaha V-Star riders

Question about a Battery for my 2010 650 Classic: I had my bike on a battery tender for most of the winter and tried to start it up this past weekend with no luck. I tested it and it is showing that all cells are dead. So, time for my first battery change. The only place I could find one was my local Dealer so $110 later...OUCH. So I have this battery which was sold to me dry. I think I can handle loading it up with the acid bottle pack but when it comes to charging it up I was not sure if my battery tender was a good option? It is a 12V 800mA. Another question, how long does the average motorcycle battery last? I bought the bike with a "New" battery in 2012 and it only lasted a bit over two years...

0 comments

if the valve seals was bad there would b oil in the exhaust or intake chamber... — Yamaha Warrior Raptor YFM350

if the valve seals was bad there would b oil in the exhaust or intake chamber right?

10 comments
  • how u cut slots in a socket? grinder?

  • When you first try to compress the spring with whatever tool you use it should go down pretty easy. If it doesn't then give the tool a few taps on the side of the spring to free things up a bit. I almost bent my tool out of wack. A little pressure and a few taps. I can almost do it with my hands when it's not stuck.

  • Yeah grinder whiz wheel cutoff wheel whatever you have.. Mario is right. It may take a few taps to knock the keepers loose that hold the valve in place

Thethet Gonzales shared a Page to the group: Yamaha Sniper MX 135/150i Owners (SniperMX Philippines Visitors Page). — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

Good News..for all.......... Oliver & Thet Body Works And Car Care Services.

If your car's paint is looking dingy and faded or you're just looking for a change of color, OT's team could save you thousands of money. Good prep work and being systematic in your approach will have your faithful jalopy looking like new in no time..oven baked..and car show finished

We have a special promo for WASH OVER, IN AND OUT PAINTING AND STRIP TO METAL we offering you free INTERIOR DETAILING, ENGINE DETAILING, UNDERCOAT AND FREE MAGS REPAINT IN ANY COLOR YOU WANT..

PLEASE CALL LIMITED OFFER ONLY...

call 216-4400, 09328528202

like us www.facebook.com/otcarcareservices

0 comments

Undangan resmi — YMJT (YAMAHA MIO JAWA TIMUR)

Undangan resmi...

Sawer..sawer donasi peduli kelud 2014 bersama YRFI JATIM 1 bhaksos bareng YTCM malang memberikan bantuan pasca bencana di daerah pujon-ngantang.

Setidaknya dri beberapa gabungan dgn relawan disiapkan untuk melayani masyarakat korban bencana ini. Yg insya allah diadakan pd:

Hari/tgl : minggu -23 februari 2014

Pukul : 07:00wib-14:00wib.

Tempat: bengkel Mitra yamaha ngantang

Acara:

1. servis gratis sepada motor yamaha

2.Penyaluran bantuan dri rekan2 bikers

3.Kerja bhakti

Tiada kata terlambat unt membantu saudara2 kita pengungsi gunung kelud, kami mengajak berpikir dan bergotong royong unt meringankan beban penderitaan sesama saudaranya. Maka kami mengajak rekan-rekan technici atau bikers untuk berpartisipasi dan menyisihkan sebagian rezeki dlm kotak donasi peduli kelud.

Nb;

1. persiapkan masker dan kaca mata

2. mohon unt disampaikan ke rekan2 club yamaha se jatim.

#indahnya perbedaan dan bendera kita sama satu tujuan untuk kemanusiaan.

Koordinator:

Jend. sarkawie /waketu yrfi jatim 1( 081235608910)

cc.

- PENGURUS YRFI PUSAT

0 comments

Any ideas tips me and the wife like to go on long rides she wasn t comfortable... — YAMAHA PICS MODIFICATIONS

Any ideas, tips?....me and the wife like to go on long rides, she wasn't comfortable with the stock sissy bar & back rest,..so I bought this trunk on line and with a shit load of modifications I got it to fit ( although the trunk was supposed to be " UNIVERSAL")...I used the original mount that the trunk came with....and all the mods I made held up fine on our last ride....now, the original mount is starting to "twist & bend"....the trunk & seat are fine....the hardware it came with is CHEAP GARBAGE....does anyone know who sells a FLAT LUGGAGE RACK for a 09 V star 950 that replaces the sissy bar & back rest?iv looked all over the web,...my next option is to cut up my OEM sissy bar & use the mounts and fab my own rack for the trunk to mount to...

1 comments
  • Here's a pic of how I had to mount the trunk......you can see ware the OEM sissy bar & pad slide in......

Rikki Brown shared a link to the group: Yamaha XS650. — Yamaha XS650

Has anyone on here installed one of these on there XS yet. Gonna convert two of my bikes over if this lil thing does da trick.

10 comments
  • I saw an XS at a show which had a hydraulic clutch fitted, the guy told me it was from an early Honda VFR 750. Just got a complete setup from Ebay (£30 :-) ) and hope to get round to fitting it later this year. I'll let you know.

  • I tried that VFR route it ended up a mess @Rikki would love to know if this Pit bike thing works

  • We sell alot of the conversions... Here is a link, and you can find install instructions and more on this link. http://hughshandbuilt.com/shop /hhb-hydro-clutch-swap-kit/

Fzr front still tacky itching to remove the masking tape and get polishing the... — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

Fzr front, still tacky, itching to remove the masking tape and get polishing the rim, must wait ;)

10 comments
  • Ben Willmott too much lol, you can get cheap ones off ebay but theres no guarantee of quality#

  • cool just like the fork valves, $$$ for safety, guess it'll all happen winter then, the upgrades, summer in oz now, just over 1am in the morning now & i'm about to open up my beast, love midnight runs with noone around

  • The Arashi rotors are basically a Galfer knock-off. Similar in design, but less cost. I have read that performance is on Par with the Galfer and EBC rotors. Many members on the FJowners forum have installed these rotors with fine results and zero negative feedback. The photo is of my 89' with an FZR wheel and R1 calipers. http://www.ebay.com/itm/Black- Front-Brake-Disc-Rotor-YAMAHA- FJ-1200-88-95-89-90-91-92-93-9 4-/301098827170?pt=Motorcycles _Parts_Accessories&hash=item46 1ae37da2&vxp=mtr

Photos from Diponwheels CarwashDetailing Plasti Dip's post — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

Plasti dip Pampanga is now available in Pampanga our US product came to the Philippines to see the latest automotive paint that can be remove and won't damage your original paint but make your project look cool. we have varieties of color to choose from matte to metallizer, pearlizer and gloss finish it bonds in any type of metal wood and plastic our small shop located in Baratilyo in between Zagu and PNB close to jenra mall Angeles, Pampanga look for Jhen stall for more info pm me.

Visit us in our FB page at Plasti Dip Pampanga for more info. we ship too thru LBC!! please share to your friends and family.

0 comments

Opinions please Look close top of tires lean to the left On of upper or lower... — Yamaha Warrior Raptor YFM350

Opinions please. Look close top of tires lean to the left. On of upper or lower a arms bent. Idk which one. Hard left turns and pulls hard to the right. Advice would be appreciated!!

10 comments
  • A torch and pry bar and some patients you can fix it but you will need to gusset it after that

  • Agree frame bent front end mine was just like that front and rear . I just swapped the motor into a 87 frame took about 3weeks because I got OCD an cleaned everything also did some mods while motor was out. Look on Craigslist for frame do not heat frame up you will make it worse

  • You can fix it. I had one that was 17* off and we got it within 1.5* of true and painted it. That bike has been dogged and never tweaked again

Greetings Bulldog lovers — Yamaha BT1100 Bulldog

Greetings Bulldog lovers,

Can you please help me solving an problem that came up with my bulldog.

The oil lamp lits when I throttle more than usual.

The oil level is fine.

I just don't know where is the origin of the problem.

Can I it be a need for carburators synchronization?

10 comments
  • I change the oil once a year in the spring and i put 20w50. For me it happend only 1 time when i left the bike 20min idle runing in the automn. I stop it 10 min and after that no probl. My oil level is almost to the top of the glass window. Last year i have used 15w50 motul 5100. Was kinda unhappy with it. Hope to get putoil 20w50 vtwin from somewhere this spring.

  • I only drive it with dry weather. Perhaps from what I read from you the 20w50 is the better one.

    Thanks :-)

  • Yes, for this engine 20w50 is a fine oil.

Will the handlebar upper clamp from a vstar 650 classic fit on a 1100 classic — YAMAHA PICS MODIFICATIONS

Will the handlebar upper clamp from a vstar 650 classic fit on a 1100 classic?

10 comments
  • There is an acid you can dip it in to strip chrome cuz its illegal to sand blast off. Some b.s. epa shit. And its gonna be aluminum under it and just polish it. Will have hardley any bank into it

  • Illegal to sandblast ?. Sorry Cody, someone was blowing sunshine I your ear. You may be able to wire brush it on a bench grinder and shine it up. I find them quite useful :-) .

  • The epa has made it illegal to sand blast chrome because all the harsh chemicals in it so you have to dip it in acid to strip. I work at plating plant and these are tried and true rules. Second there is some sort of solid under the chrome whether its steel or aluminum. So once you get the chrome off you can sand it, buff, sand it, buff, and sand it til you get to a very very fine grit and then polish it on wheel. Kinda know what im talking about its what I do.

Anyone know were I can get this bumper for my warrior cant find it in stock... — Yamaha Warrior Raptor YFM350

Anyone know were I can get this bumper for my warrior cant find it in stock anywhere

10 comments
  • Did he offer them to you for 100? He was running a special for the first buyer and then everyone else got them for 10% off

  • Who was offering you those pro Amor Xc for 100$

  • ALBA's rep was offering a special for the new Pro peg nerfs for 660 raptors. I paid close to 300 for the Proarmor XC's I got, I wish I could have got them for $100. I just sold a nice set of Proarmor revolutions from a YFZ for 135 and they retailed for $400, Some prices for good parts are expensive and crazy.

ok dito ko na lang sagutin para din sa iba — Yamaha Mio Mx 125 Parking Lot

ok dito ko na lang sagutin para din sa iba

sir, ano mganda gawin para lumiksi si mx pero ayaw ko magbore up?

kung ako nasa kalagayan mo eto gagawin ko; pnp head, palit cams ( wag stock ha ? hehe ) palit pipe, kung may extra pa palit carb, tapos bawas gasket then tono ang gilid.. bow!

kasigla neh?

10 comments
  • just make sure na mhigpitan ng husto ung nut pra wla.problm

  • tama, yan problem ko ngayun, mukhang lumuwag ung nut ko or nabungi na driveface, :(

  • Okie sir Eiger Uy thnkz s advce. All in the plan boss. Hehe.

Heres a table of sprocket combination for reference — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

Heres a table of sprocket combination for reference.

the stock gear ratio is 2.6 (in bold)

the 'Above Stock' gear ratio are high speed sprocket combination.

the lower the gear ratio, the more high speed (top speed, less acceleration)

the 'Below stock' are low speed sprocket combination.

the higher the gear ratio the more low speed. (good acceleration, less speed)

Front teeth | Rear teeth= Gear Ratio

16 35 = 2.19

16 36 = 2.25

16 37 = 2.31

15 35 = 2.33

16 38 = 2.38

15 36 = 2.4

16 39 = 2.44

15 37 = 2.47

16 40 = 2.5

14 35 = 2.5

15 38 = 2.53

16 41 = 2.56

14 36 = 2.57

15 39 = 2.6 Stock gear ratio

16 42 = 2.63

14 37 = 2.64

15 40 = 2.67

16 43 = 2.69

14 38 = 2.71

15 41 = 2.73

16 44 = 2.75

14 39 = 2.79

15 42 = 2.8

16 45 = 2.81

14 40 = 2.86

15 43 = 2.87

16 46 = 2.88

14 41 = 2.93

15 44 = 2.93

15 45 = 3

14 42 = 3

15 46 = 3.07

14 43 = 3.07

14 44 = 3.14

14 45 = 3.21

14 46 = 3.29

so if you want more top speed than stock settings

use 14t front and 36t rear

or 16t front and 41t rear

if you want more acceleration

use 13t front and 34t rear

or 16t front and 42t rear

BIGGER TIRES (100/80 and up): use the below of 'Stock Gear ratio'

SMALLER TIRES (80/80 and below): use the above of 'Stock Gear ratio'

na copy paste ko lng hehe

0 comments

usapang bore up — Yamaha Mio Mx 125 Parking Lot

usapang bore up:

Question: nagbabawas ba talaga ang coolant? or gaano karami ang naibabawas?

sagot ko: hindi po, kung may bawas man ay very very minimal

eto ang malaking challenge sa pag upgrade ng pinakamamahal nating mx.

ang basic operation ng cooling system natin sy ganito, sa normal temp ikot ikot lang si coolant, at a certain temp mag expand si block taas na din ang pressure, at a certain pressure mag rerelease si radiator ng coolant papunta sa reservior, vacuum ang system, paglamig ng engine, dahil vacuum nga hihigop pabalik si cooling system mula sa reservior

ngaun, kung ang mx mo ay bumubulwak ang coolant sa reservior, ibig sabihin fucntioning ang pag release, bumubulwak dahil hindi makahigop pabalik ng block, isa lang ang cause neto may singaw ang system.

kadalasan sa head gasket, kulang sa higpit, crack hose etc etc

isang symptoms neto ay bumubula bula ang coolant sa radiator kapag nirev kung hindi pa naalis ang thermostat, or ung gate sa may block/head .

10 comments
  • Ganun pala yun.salamat po mga kuya.

  • boss ask ko lng saan banda nkakabit ang thermostat natin,minsan kc npakainit ng engine q,ang lakas pa ng singaw ng init sa radiator side..salamat po sasagot

  • Boss Kenjie Takeshi ngyre sten to.remember nun 59 plit ngtagas coolant.

mexicanos — Yamaha Virago 535

mexicanos?

10 comments
  • Lo que estoy buscando es el tablero brother y tampoco tengo como ver cuanta gasolina tiene en el tanque, la uso al cálculo :(

  • el indicador de tanque vacio?

  • Agrégame brother para platicar sobre eso, chance me puedes orientar un poco

Photos from Rommel Gabriel's post — Yamaha Sniper 135 Classic

Brand New Items For Your Sniper

1. Chainlube - Php 130.00

2. Instep Shifter - Php 180.00

3. Legbag - Php 500.00

4. Motospray (Helmet Deodorizer) - Php 100.00

5. Helmet Holder - Php 170.00

6. U-Bag V.1 - Php 800.00

7. U-Bag V.2 - Php 900.00

8. VS1 Proector (250mL) - Php 160.00

9. VS1 Helmet Deodorizer - Php 100.00

10. VS Visor Guard (anti-fog) - Php 100.00

Location: Agudo st. Caloocan

Contact: 0917 70 88 694 or 0922 390 48 60

for more items, please visit my page: https://www.facebook.com/MotoD ecalsAndAccessories

0 comments

Hola gente le pique a una falcon me la comi hasta los 100 kmh mas o menos pero... — Yamaha VR-R 150 2T

Hola, gente le pique a una falcon me la comi hasta los 100 kmh mas o menos pero despues me paso, soy mal piloto o es normal ? jaja saludos !

10 comments
  • muy muy muy buen debate

  • auto felicitacines para el grupo!

  • Yo lo que tengo que opinar que nunka me tiro un Falcon A FONDO por que los que majean los falcon son casi todos unos putos yo le acelere a miles pero nunkaa escuchee que ellos venian al corte y tampoco tiraban los cambios bien 0 puntaje para los que manejan un falcon hace unos dias me di ceunta lo que anda un falcon 400 pasaron 3 negros arriba de uno 4 cuadras en contramando cagandese a tiros con la policia y te puedo decir que ese si venia a fondo lo que da la cortinaaa y nunka aflojo y creo que cuando choco facil volo 50 metros asi que hace de cuenta que en 4 cudras con toda la policia atra en negro soldo la cortinaa y no paro hasta matarse yo te puedo decir si el que maneja el falcon a fondo anda muy fuerte esas primeras 4 cudras (los cambios los tiro sin embrague y con la cortina soldadaaa a fondooooo fondddooooo ni se escucho el motor caer en vueltas entre cambio y cambio 4 cudras)

Photos from Jamieson Gay's post — Enduro Yamaha IT Series

I have the following parts for a 1986 IT200 For Sale

Located : Nova Scotia , Canada

I will ship worldwide

Seat $100

Silencer $80

Throttle Set up $50

Wiring Harness $50

Coil $60

Kill Switch $30

Handle Bars $30

Prices are not including shipping

5 comments
  • would these fit an 83 250 k?

  • I have no idea , im sure some of the parts will match up , just look online see if the part numbers match up

  • all i need is the exhaust the wiring harness and kill switch

  • Part numbers on the exhaust are different but it still might work

    part numbers on the kill switch are the same

    wiring harness has the same part number as well

  • I'll inbox you mate

Is it worth it to remove the air box lid and will I habe to re jet my bike — Yamaha Warrior Raptor YFM350

Is it worth it to remove the air box lid and will I habe to re jet my bike

10 comments
  • guy I bought it from jetted it for the pipe and 366 but ran rich i tried it today with no lid it sounded awesome and ran better then it usually does actually sounds really healthy

  • I ran mine with a drilled lid before i went to the pod filter and it sounded real good, and with the pod filter it sounds better imo. If it runs good with whatever you did then leave it alone. If you do decide to mess with the jets, go up one size at a time and see how it runs and go from there

  • okay thanks