• Andrew Johnson shared a Page to the group: Yamaha YTM Three Wheeler Group. — Yamaha YTM Three Wheeler Forum

    Anyone want to help me admin this page?

    2 comments
    • What does admining consist of?

    • any 3 wheeler content

    — YAMAHA Attitude Ltd

    :)

    10 comments
    • Great job Jon!

    • just the X2N Dimarzio guitar humbucker.

    • Took it for a test run at the gig tonight. The upgraded pickups and hardware has turned this once mild mannered bass into a pissed off rock machine !!! I use it every year for all the St. Patricks Day shows. This year I will play 9 shows over the next 4 days.. It will see a lot of action for sure. (y)

    Can someone help me explain how to paint the bike Never did a paint job myself... — Yamaha FZ6R Owners

    Can someone help me explain how to paint the bike? Never did a paint job myself before but lookin at all your custom bikes makes it look not too bad. I want to repaint all the frame where the bike is white into a flat black, does it require taking the bike apart at all? Someone explain to me, thanks.

    10 comments
    • I have taken apart more than a 9mm bro lol marine. But havent attempted this yet

    • I would avoid that

    • Iknow u have.... which is why i mentioned it. U got this. The tank is easy. Your two hoses that run to the bottom may dribble a little fuel. The main line disconnects easily and there is a valve that prevents fuel from coming out. The two front screwes removed will allow u to pivot the tank for access. Two connecters later and its all free. Take the pivot bolt out and walla.

    so pissed got my warrior rebuilt finally got the carb issue worked out and it... — Yamaha Warrior Raptor YFM350

    so pissed got my warrior rebuilt finally got the carb issue worked out and it quits gettin fire... AGAIN! So imma try and rollstart it tomorrow if it starts i gotta put ANOTHER coil pickup in it. If it dont rollstart i get to test all the electronics AGAIN. YAYYYY. GRRRRRRRRRRRR

    10 comments
    • Mine would not work on the button. Would roll by jumping but wouldnt fire. Thought it was the handle kill switch shit but it was just the solenoid. and btw kyle alot of shit you get on ebay is a shop selling them and expanding there business to online bids. Yes some of the shit on there is garbage but you can find honda east. schiets. Ect ect very easily on there selling oem parts youd buy in there store. Just gotta look gor em:)

    • k ill check that tomorrow also i have another solenoid thanks yall

    • Yep put you other solenoid on it.

    Quick bit of advice required gents. My 89 3cv has developed a sticky throttle — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

    Quick bit of advice required gents ! My 89 3cv has developed a sticky throttle ! It doesn't return on handle bar ? Is there a quick fix or is it a case of easier to replace ??

    10 comments
    • Ah the old case of the older i get the faster i was.... lol

    • nah, not that simple, lol. the fj was the first bike he had ridden in ova 15yrs. lmao

    • Strange thats what happened to me lol

    Found this on my porch this morning — YAMAHA Attitude Ltd

    Found this on my porch this morning.

    Not sure yet but I think it might be getting a Kahler.

    9 comments
    • I was thinking of getting this http://m.ebay.co.uk/itm/130562 094828

    • I love my Kahler on my Seafoam Attitude and can't imagine not having one on a bass I would play often. There is just so much I find it adds to my playing from dive bombs to adding little bits of favor to clean passages, not to mention soloing and making solo arrangements for bass. In my opinion its just limited by your imagination and how much you really want to make use of it.

    • Mark Francis Tully that thing looks like it would take alot of real estate on a bass, similar to a Hipshot in that it would need rear routing for the springs.

    Little question here. 2010 Vstar 950. Lost all electrical all of a sudden — Yamaha V-Star riders

    Little question here: 2010 Vstar 950. Lost all electrical all of a sudden. Started fine ran fine 2 days ago. This morning, it powered up, ran the pump for a sec, speedo gauge jumped and the clock came on and then....nothing. Tried to jump it. Didn't do anything at all. No electrical. Thinking main fuse. Here's the question. I looked at the manual as far as where to main fuse is, but the artist who did the drawings sucks and I can't seem to figure out where it is or how to get to it or what it looks like. Any help much appreciated. I think it's the big green fuse looking thingamabobber that's under some cables I'm probably going to have to cut the ties around to get to.

    0 comments

    Useful info — Yamaha Past Masters Racing Forum

    Useful info:

    So I am getting quotes for breakdown cover for the Van. The RAC have informed me that any Van that is sign written will be exempt from recovery unless a business policy is taken (doubles the price). Also max length is 5.5m including towbar. None of this is mentioned during online application so I guess you would probably only find out when you really needed them!!!

    The AA on the other hand are happy, the only restrictions are 3.5T and 2.3m wide.

    10 comments
    • Try Green Flag. They will pick you up and caravan. If you're on your way somewhere they will take you to your destination and come and pick you up at the end and take you home

    • It might be cheaper the insure this year but it expect a major hike next year as Loyds of London who under right most of the uk policies try to recoup a lot of their money ( I should say ours! ) from all the flood damage and high winds...although to be fair most of the wind was created by me after eating half the Hog roast that Doug Edmondson dontated at the end of year party lol

    • Been with RAC since 99 and never realised there was such a restriction - total length for recovery is 25ft - so my caravan is roughly 21ft so as long as I have a 4ft car oulling it I'm screwed - Total nonsense - Anyway I'm green flag now for £40 cheaper... Goodbye Mr RAC...

    Scottoiler — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

    Scottoiler............

    Mine came with one, it has never been that good, I mean that to get it to flow I have it on number 9. The vacuum pipe is OK, as when the bike is started the valve inside the reservoir lifts, I have blown through the breather so that is OK. I removed the feed pipe from the reservoir, and it dripped. My conclusion is that I don't have it high enough, it was mounted on the frame below the side panel. It could go behind the seat by the toolroll, but, might be too horizontal. Thoughts anyone?

    0 comments

    Hi all I don t often post here but I m asking a favor Since we re all... — Yamaha V-Star riders

    Hi all, I don't often post here, but I'm asking a favor. Since we're all motorcycle riders, I would ask if you would consider donating to my fundraising for LLS and Team in Training. The is a cause that I hold near and dear. In support of that, I am including this patch. Wear it proudly! Donation is only $10 and I will ship it free of charge. You can simply click on this link and make your donation. These patches are 4" in diameter and look fantastic on your leathers! http://pages.teamintraining.or g/sd/nikewhlf14/serenityva

    0 comments

    Hola buenas tarde queria saver como ago para medir el aceite de mi yamaha yz... — Yamaha YZ250 2-stroke

    Hola buenas tarde, queria saver como ago para medir el aceite de mi yamaha yz 250?? porque no tengo idea :/

    7 comments
    • Ponele MOTUL TRANSOIL.

      lo conseguis en cualquier casa de moto. Viene por un litro. Al costado de la botella tenes para medir. Te tiene que quedar 250 cm3 en la botella. Lleva 750 el motor. Saludos

    • ah muchisimas gracias, otros para vos capo!

    • Hola, buenos dias Niko....

      La moto fue mi viejo YZ125. Uno de los aceites que se vera es el Motul Transoil Expert que Matias mencionado por su aceite para caja de engranajes. Like he said, you pour it in the crankcase at 750 cc for your YZ250.

      El Motul 800 offroad 2T, por otro lado, es el aceite de 2 tiempos que solia premezclar mi gasolina..... I use it at a ratio of 32 parts gasoline or petrol : 1 part of 2-stroke oil.

      Hasta luego amigo....

    badtrip. nasemplang ako kanina. binugaw nung tao ung aso at sakin nagpunta — Yamaha Sniper 135 Classic

    badtrip. nasemplang ako kanina. binugaw nung tao ung aso at sakin nagpunta. buti nasa 3-10 lang takbo ko ng motor. gasgas sa kamay at tuhod. butas ang pantalon at mejo maga kanang wrist. mejo gasgas din motor. dapat may pananagutan ung may ari ng aso pinababayaan sa kalye. pagnakadisgrasya sila pa magalit. nawala din sa align ung gulong at manubela ko

    8 comments
    • dito samin bawal ang mga aso pakalat-kalat... Vheajhane Jumawan Preciados ganda ng ginawa mo paps ah, cguradong aamin ang may-ari ng aso..hahaha

    • ganun dyan senyo paps? location nyo paps? babayaran ka ba pag nakapatay ka ng asong sarante sa daan? sarap naman dyan easy money hahahaha!

    • pag ako singingil. sabihin ko sya dapat magbayad. aso nya nakadisgrasya. kakalat kalat sa daan. gasgas at sakit sa katawan pagsemplang kahit mabagal takbo ko at ung gulong ko natanggal sa align at gasgas din motor ko. madalas sila pa galit at maniningil pagnasagasaan mo aso nila. isa sa responsibilidad nila itali at ikulong mga aso nila. wala kasi nanghuhuli ng aso dito. maganda sana kung meron

    Stock lang. — Yamaha Sniper 135 Classic

    Stock lang.. :-)

    10 comments
    • Un nga po ser ang aus ng comment q sbay ssbhan aq ng gnun.,

    • haha dont worry ikaw yung malalim na dagat.. LOL

    • okay lng yun boss Cathnel Flores intindihin mu nlng po kc baka d makaintindi yun.. wag n kayu mag bangayan hayaan mu n yun..

    A derivative for sale peeps — YAMAHA Attitude Ltd

    10 comments
    • Ive been rumbled so I would get my nuts cut off if I brought anymore gear home!!!! Yes it is an addiction!!!! A good one though!!:-)

    • Wor lass would have tae stitch mine back on first.

    • Ha!!!! Nice one, or maybe not!!!!:-o

    The move didn t go to plan Tie down loop came away from van FFS But luckily... — Yamaha FJ 1100 1200 and 1300 sport tourer - LATERAL FRAME CONCEPT

    The move didn't go to plan ! Tie down loop came away from van ! FFS ! But luckily no damage !

    10 comments
    • i tried it and didn't have much luck, moved about 5mm either way before hitting the box, the crank breather was a pig,walked it up with two long screw drivers, so if you need keyhole surgery im your man ;) as for the carb rubbers, all those years of whoreing it down the bull meant i managed to get it sorted with delicate finger work ;)

    • It's just the airbox now mate so if your bout sat get your fishy fat fingers round mine!

    • yeah, give me a text in the AM to remind me, getting old you know ;)

    Owner. Ryan Quinn Lourd Roales Chua — Yamaha Sniper 135 Classic

    Owner: Ryan Quinn Lourd Roales Chua

    Bike Name: Alexandra T135

    Group: SEX-C Boys (Sniper EXclusive Cotabato Boys) and CSR (Cotabato Stallion Riders)

    Location: Cotabato City

    Forum Name: Ryelle61

    Mechanic: Rowel Jawile and Levie John Abaquita (Surallah)

    57 inside

    10 comments
    • mabagal pa yang sakin paps.. di ako makakaya sa mga kasama ko sa sexc boys. stock lang kaya kong iwan sa amin.. mostly kasi dito samin pang waswas e. ang vixion dito samin parang stock lang ang dating.. kasi ang kasanayan nila dito 62mm.. ang new dito samin 65mm up.. tapos may plano pang umakyat.. touring mods pa lang po yan. ala pa yung pang drag. hihi!

    • waaaaaaa grabe pala jan...

    • hehe! add mo po sila sir.. mga mamaw Moshier Alfar Zailon Cardinalstone Acmad - Rowan Jawile - Levie John Abaquita - Far Away - Ashaz Acmad - etcs.,

    Sa mga fans namin na R150 d2 sa page namin its is nice to have conversation... — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    Sa mga fans namin na R150 d2 sa page namin.. its is nice to have conversation with you guys.. panget kc kung sniper vs. sniper or raider vs. raider.. kapag nabangit natin na raider at tinatung natin kung cno ang greatest rival nya.. its sniper paki correct lang po ako kung mali ako.. kc i dont think there has a rivalry between r150 vs. cbr150 or cbr 150 vs. sniper... normal lang po ang palitan ng yabangan at konting pagtatalo.. but at the end on the road.. we race each other.. matalo manalo lets accept it.. lets peace with each other not fist with each other.. after FG let say " ang Galing mo pre... till next time ulit.. but always keep safe and be defensive at all times on the road.. peace brothers..

    0 comments

    so does the spring and valve cap mod in carb thats on the forum work just... — Yamaha Warrior Raptor YFM350

    so does the spring and valve cap mod in carb thats on the forum work just curious cuz my pump is sticking and i was wondering if its cuz of the weak oem spring?

    10 comments
    • id rather not risk wot hangup lol

    • use the spring out of a bic pen... works great!

    • Get a rubber vacuum line cap instead of a valve cap. It will fit tight over the accelerator pump rod

    Share lang mga paps Kahapon sa parking lot ng sm fairview nakita ko itong gp... — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    Share lang mga paps. Kahapon sa parking lot ng sm fairview nakita ko itong gp edition ng smx sabi ko ang yummy naman halos tapat lang ng smx ko nakapark to tas out of no where una kong napansin yung dalawabg helmet na pinatong lang sa side mirror sabi yaman parang wala lang na makuha yung mga helmet. Mas lalo ako nawindang nung makita ko pati susi nya andun pa sa motor nya! Mas lalo ako napa WOW! Smx gp type for free! Pero di tayo ganun kapwa rider ko ito kawawa naman kung manakaw ang motor nya. So tinawag ko mga guard sa parking sinabihan ko na kunin yung susi para pag dumating yung may ari eh ibigay nya. Sa may ari nitong smx gp type brad alagaan mo tong motor mo. Masakit sa kalooban yan kung mawala yan lalo na sa bulsa! :)

    0 comments

    Anybody have an opinion on wet sanding plastics before paint — Yamaha Warrior Raptor YFM350

    Anybody have an opinion on wet sanding plastics before paint?

    10 comments
    • Used an adhesion promoter hope it helps.

    • If your gonna paint do sand and use hi-flex plastic paint. Did it to my plastics(they were blue and red when i got it) and i havent had any chipping yet. And im not nice to it in the woods lol

    • Using promoter and acrylic enamel.

    Que marca y de que tipo son los Rulemanes Originales del vrr Rulemanes de... — Yamaha VR-R 150 2T

    Que marca y de que tipo son los Rulemanes Originales del vrr ? Rulemanes de bancada...Retenes tambien necesito saber...y tambien si alguien uso alguno compatible y que experiencias tuvo ?

    5 comments
    • tenes los que trae de fabrica que son koyo japon, segunda opcion los ntn japon, tercera opcion tenes los skf pero los de pista de poliamidas que son raros, mi opinion con ntn anda bien, retenes siempre puse los originales y tengo guardados 3 de bomba de agua, dos juegos de bancada, un juego completo de guarda polvos y retenes de barral todo genuino yamaha, vienen genericos pero no los probe todavia los de los barrales, si buscas se consiguen, los codigos estan en el manual y si no encontras el de los rulemanes te los puedo llegar a buscar, pero en un comentario viejo en el face estan

    • vendes un juego de ret de bancada?

    • PD: hay dos rulemanes dificiles, el de la selectora no hace falta que lo cambies y el del eje balanceador que va metido en una especie de vaso no te gastes, yo compre un juego de estractores solo para cambiarlo y gaste 1500, esta en vos el resto

    • no, los tengo guardados para mi o por si le pasa algo a un amigo pero se consiguen todavia

    • la primera vez el juego de retenes me salio 58y 62 y la segunda vez me salieron 63 y 70 depende donde los busques

    Matt Barber shared a link to the group: Yamaha Past Masters Racing Club. — Yamaha Past Masters Racing Forum

    This is quality! Were all of the rounds televised in '08?

    10 comments
    • Keith Royster lol

    • The 2008 TV spot was also memorable for Dexter Eyre, he painted his bike in the paddock with a Halfords can of red, the first maintenance or attention the old girl had got for ages, no rubbing down, no masking off, just paint over the dirt and stickers :-)

    • He' coming around to drop some bits of next week hopefully he's going to have kittens

    Wife question what type of pickup did Billy use back in the day the neck... — YAMAHA Attitude Ltd

    Wife question; what type of pickup did Billy use back in the day (the neck/woofer pickup). I picked up a sweet P-bass that I'd like to do something similar with. Nothing will take the place of my Black Att III, but though I'd enjoy boosting my P bass also.

    10 comments
    • The M1 is in my Att X.

    • I do not use the Model One .. saying best bet for neck position is kinda subjective as well. I prefer my 1966 EBO to the Model One.. and I actually prefer the X2N as well. Experiment with different pickups in neck position, you may find something that sounds great to your ear. The Attitude III has a Yamaha pup and I haven't heard anyone complaining about it yet. I even had a custom bass built with a JAZZ pickup in neck position !! :)

    • I've seen basses with a precision pick up at the neck. Roger Glover had his rick customised with a Gibson bridge humbucker and 2 jazz pickups wired as as one big humbucker at the neck as he wanted a more aggressive sound. Use what works for you.

    incase you have not seen Bemsee Online registration Message from Mike Tracey — Yamaha Past Masters Racing Forum

    incase you have not seen -Bemsee Online registration - Message from Mike & Tracey

    Those of you who have renewed your Club Membership and provided us with an email address......you will receive an email in the next week or so directing you to our initial web-registration site.

    Here you will be able to add all your details, covering address and next of kin info, bike, engine and frame numbers, transponder numbers, class etc etc.

    Creating your own password protected account in this way will enable you to use this data when we release the online entry and testday part of the site.

    Won't be long, it's all in testing at the moment and we want it to work perfectly before launch.

    In the meantime, continue to send paper entries for meetings as usual

    0 comments

    — Yamaha BT1100 Bulldog

    10 comments
    • Hi James, the windscreen is the Original but i have cut it and with Carbonfakefoil covered. The other Windscreen is the same only painted. You must fillers with primer and than you can Paintet it.

    • i put it above the handlebars on the weights. I thought that there would be in the way but it drives really nice!

    • very nice bike Karsten Guhrmann!

    Photos from MJ Cavender's post — Yamaha YTM Three Wheeler Forum

    Found some Tri Zs today in my hunt for parts. First one is a Fat Cat? Why can't most parts not be on one frame...

    6 comments
    • Too bad no engines

    • Talk em down

    • Probably just come back and build one out of all the frames and scattered parts

    Raymond Gutierrez shared his album to the group: Yamaha Sniper MX 135/150i Owners (SniperMX Philippines Visitors Page). — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    CHEAPEST REPAINT Motor/Car : Mags, Full Fairing with or without Lining, Buffing

    Minimum of

    850php : 2pcs Mags

    Minimum of

    1,950k : Full Fairing Color

    2,500k : With Lining its up to you kung anong Style ang Gusto nyo

    Minimum of

    500 : Buffing

    Note : we Use " URETHANE PAINT and URETHANE CLEAR TOPCOAT " better than Acrylic,

    pwede nyo din iwan motor/Car nyo dito or fairing or mags nalang dalin nyo

    Full Fairing Repaint takes " 4days TO 7Days "

    Mags " 2days to 5Days "

    Buffing " 1Day TO 2Days "

    Location : Project 4 Quezon City,

    Near QMMC "Quirino Memorial Medical Center"

    10mins lang byahe from MAIN TAMBAYAN

    PM me for More information..

    https://www.facebook.com/media /set/?set=oa.586708558087944&t ype=1

    0 comments

    13. 5 n pulley okey n ba un — Yamaha Mio Mx 125 Parking Lot

    13.5 n pulley okey n ba un?

    10 comments
    • Ah...salamt sjr...d po b nkktkot mg bore up...kc po mhilig kc ako s long drive kya nttkot po ako mgboreup...

    • Nakakatakot po sir mga mech

    • Sa pag upgrade po kasi ng mc nanjan po ung risk, ngaun para mabawasan ang pangamba hanap po tayo ng mapagkakatiwalaang mech, tapos aralin din po natin ung ginagawa para kung magkaaberya kahit tru phone or kahit lakas loob magagawa.. Yan ang advantage ng may kagrupo lalo kung nationwide

    — Yamaha V-Max

    3 comments
    • Once in a while a fat ass is great :)

    • Fett cool

    • To all that like my ride

      thanks. But couldn't of done it without DEEP POCKETS. AND to Paul and Elizabeth Civitello At

      Mad Max Enterprises

      madmaxrace@aol.com

      Whether U want SERIOUS POWER or LOOKS

      More pics to come

    Photos from Kelly Gnyp's post — Yamaha V-Max

    Denny Krontz here is a picture of my back tire. This is a 330 U can even do a 360. Enjoy

    3 comments
    • Dang!!!!!!! Love it!!!!!

    • can you send the measures for that and how too ..this is what iam looking for to do ...ty Joe

    • Who made the tail light,,i would love to have one like it.

    Photos from John E Wilson's post — YAMAHA PICS MODIFICATIONS

    I'm back and got a couple pics to show ya:-) Here are a few pics of the 2011 V* 1300 I acquired back in January '14. Just finished painting the tins, saddlebags, and the Reckless Fairing. Completed an oil change, coolant flush, rear brake pads and new NGK plugs all this past weekend. Getting Shinko 777 front and rear tires mounted tomorrow. That's about it, just waiting on the weather to get right so we get some riding in.

    Sitting next to the 1300 is my wife's(my old bike) 2012 V* 950.

    7 comments
    • They look great. I wish I could do that to mine everyone I went to was worried about the flex in the lids

    • @ Shawn Matte, Hmmmm.....flex in the lids??? Hadn't considered that, oh well, so far so good. The only thing that I did notice is that without the leather, I needed to add some padding between the hinges to have the proper spacing between the hinge and the bag for mounting. I also reused the rubber seal on the inside lip of the bag to maintain the correct height and seal for the lid.

      Hopefully they hold up well when it gets hot this summer.

    • I think they should hold up. Keep us posted.

    tanung lang po mga paps — Yamaha Mio Mx 125 Parking Lot

    tanung lang po mga paps,

    may nagbigay po kz sakin ng 59 sb na 2nd hand option1 at 6.3 cam

    kinabit ko s mx125 ko tpos nag pnp nrin ako at tabas valves

    ngaun po pag andar nya ok nman takbo wala lagiltik 75kilos po ako inaangat nya ko pero parang kapos po sa dulo, stock carb at pipe parin po tinanggal klang element ng airbox at nka 125m-jet po tpos stock pa lahat panggilid kinalkal ko lang po konti at nka 1,500 clutch spring 3pcs. 8grms. at 3pcs. stock po mga bola

    malakas sana umalis dirediretcho hugot nya gang 115 tpos gang 120 lang po top speed nya stock lahat gulong, may kasabay po ako na friend ko mio soul 180cc 140 daw po takbo nya magkadikit kami pero sakin 120 lang eh, alin po kaya ang 22o? saka anu pa po ba maganda ilagay s mx para mas tumaas pa po top speed nya? yung iba daw kz nag 140 eh.. tnx po :)

    10 comments
    • Anthony ayan kaya nga raider :D

    • Hahahaha,, stock po ungraider.. Ayunnakipag testingan,, ako nuod mode kasi stuper stock nakakahiya e. Haha

    • boss kung all stock raider kasabayan maiiwan talaga yon. but kung nakapipe na+rcdi+carb mapawow ka sa tunong pag dinaanan kana. and situational yung raider... nakadepende sa driving skills lagi ni rider.

    Tony Sofia added 4 photos to My shining Star. Florida. in YAMAHA PICS/MODIFICATIONS. — YAMAHA PICS MODIFICATIONS

    some decent pics of my dirty beast... Rode her to Napa and back in pissing rain friday, then rode yesterday to the same place in intermittent light drizzle. not even enough to keep the road wet. Anyway...07 1100 V-star classic... light bells and whistles. Feb 10 I got rear ended on my 99 250 Virago... Feb 11 I went to the dealer with an envelope full of $100 bills worked them down to a GREAT price... then whipped out the cash and said " too bad I only brought so many of these $100 bills and I have 2 more bikes to go look at." we made the deal happen. goes like a champ with the first baffle cut out, 43.5 mpg on the freeway yesterday

    0 comments

    Photos from Lok Ykl's post — YAMAHA Attitude Ltd

    That's my Attitude II, over 10 yrs bass^^

    10 comments
    • Oooohh... I have a black Attitude Ltd.II and I suddenly started lusting over a pick guard like this pretty badly. If any contact information should unfold on anybody who would be interested in making these, count me interested!

    • Nice Phil Lynott Vibe here!

    • Jono Johnson, no myspace is long gone bu ti recall his name was Joel..I think!!!

    Sa wakas — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    Sa wakas....

    HOMENEWSBENEFITSMY PAGE FAQCONTACTFORUM

    MY PAGE

    Hi there Mark Lester!

    Membership Information

    Application No.:94695

    Application Date:2014/02/04 05:25

    Card No.:L04C83544

    Status:Active

    Validity:2 014/03/04-2016/03/04

    Last Update:2014/03/03 19:08

    Rider's Personal Information Edit

    Name:Mark Lester Arabat Crisostomo

    Birthday:1982-09-25

    Gender: Male

    Marital Status:Married

    Driver's License:NO111027205

    Mailing Address: 129 Lwood St Barangay Dolores, Crisostomo Compound (Infront Half court Lwood)c/o Mack Mack , Taytay, Rizal

    Mobile Number:09323877779

    Email Address:sniperlester25@gmail.com

    Username:le ster_mx25

    Password:*********

    Nearest Yamaha 3S Shop:3S Taytay Motortrade, Rizal

    Motorcycle Information Edit

    Motor Model:SNIPER MX

    C.R. Number: 8570

    Chassis Number:MH350C004DK597686

    Date Purchased:2014-01-24

    Dealer:kservico

    C lub Membership

    Other motor club:SNIPER MX PHILIPPINES

    Referred By:ALAN LOQUINARIO - SNIPER MX PHILIPPINES

    Known THIS club from:Web

    FOLLOW US:

    HOMENEWSBENEFITSMY PAGE FAQCONTACTFORUM

    0 comments

    Photos from Joey Caballero's post — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    For Sale / Suzuki Hayate Gold Limited Edition 2010........50k..neg.

    Swapping Value ..55k / swap w/ Raider 150NB/MIO mx,FINO,MX/Sniper mx........

    61mm Chrome Bore

    Forge Piston.......

    Campro..

    Lighthen plate magneto

    Offset ng crank +3

    YOLAC RACING...

    Kalkal Pipe / Palit tubo

    Big Valves

    Original 28 Kehin Carb

    Racing Fan / Cover

    Original Yoshimura Shocks

    Givi Grip

    MS Suit Original...

    Corsa Tires

    14th worth of original carbon viber accesories....

    Straight jvt pang gilid...

    Registered.....2013..ending 7

    1st Owned.....

    & Many More....

    75th Total Worth of Set up & Accesories...

    All original stock flairings included like bnew....

    Lahat stock pang gilid kasama din..

    Antipolo Area....

    Swapping Okay Depends sa Swap nyo...

    09239126306

    0 comments

    Alan Loquinario updated the description of the group Yamaha Sniper MX 135/150i Owners (SniperMX Philippines Visitors Page). — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    Exclusive For SniperMX 5S 135LC Owners

    /// Page for Aspiring Member of SMX Philippines///

    HOW TO BE A LEGITIMATE MEMBER? (Read this)

    https://www.facebook.com/notes /yamaha-sniper-mx-135lc-owners -group/how-to-be-a-sniper-mx-p hilippines-member/430490483720 620

    TRADING PAGE : https://www.facebook.com/group s/smxtrading/

    FAN PAGE : https://www.facebook.com/snipe rmx.ph?ref=hl

    VISITORS PAGE OF:

    ________________________________________ ______

    The "SNIPERMX PHILS., INC." ( SMX )

    https://www.facebook.com/group s/streetmonarchextreme/

    President AL https://www.facebook.com/alan2 18

    Vice President SESE https://www.facebook.com/sese1 968?fref=ts&ref=br_tf

    CHAPTERS:

    _____________________ _________________________

    NORTHSIDE Chapters

    1.NACALBU (Valenzuela to Bulacan)

    Chairman PROTAPER https://www.facebook.com/arist otle.patag?fref=ts

    2.ISABELA (Isabela)

    Chairman RHOD https://www.facebook.com/Lei.a lbano03?fref=ts

    3.KABALEN (Pampanga)

    Chairman BON https://www.facebook.com/johnr otsen.mentac?fref=ts

    Central Chapters

    1.xXx (West Caloocan/malabon/navotas/Q.C/Mla)

    Chairman THIZZ https://www.facebook.com/thizz z20?fref=ts

    2.BRT (North Caloocan/Nova//Fairview/SJDM)

    Chairman RYAN46 https://www.facebook.com/ryan. rieta?fref=ts

    3.EASTSIDE (Pasig/Marikina/Antipolo/Rizal)

    Chairman DNUMYAR https://www.facebook.com/dnumy ar.b?fref=ts

    SOUTHSIDE Chapters

    1.KILABOTS-(Pasay/LP/Pque/Taguig)

    Chairman KRUGER https://www.facebook.com/fredd ie.ibanez.7?fref=ts

    2.ETI_VAC (Cavite)

    Chairman ODIE https://www.facebook.com/odie. perry?fref=ts

    3.LAGUNA (Laguna)

    Chairman BOYBI https://www.facebook.com/boybi lis?fref=ts

    4.BONPEN (Bondoc/Peninsula QUEZON )

    Chairman SIERRAFOX https://www.facebook.com/richa rdteodylizaso.mendez?fref=ts

    TRADING PAGE :https://www.facebook.com/group s/smxtrading/

    FAN PAGE : https://www.facebook.com/snipe rmx.ph?ref=hl

    0 comments

    Alan Loquinario edited a doc in the group: Yamaha Sniper MX 135/150i Owners (SniperMX Philippines Visitors Page). — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    Willingness & Cooperation.....Aspiring Yamaha Sniper MX Owners willing to be a Legitimate Member of Sniper MX Phils. look first for the nearest SMX Phils. Chapter near you and cooperate. ....read the ABOUT of this PAGE.Contact Chapter Chairman or Officers. and Ask for willingness to join to have an Application Screening (Fill up application form).Provide 2 Xerox Copy of OR/CR together with Drivers license. (1 Copy for Chapter and 1 copy for Group filing) and pay for your Membership Fee + Club Plate to your Chapter Officials .Must have to Attend on Monthly Meeting, Chapter Meeting, and Ride. Wait for your Official SMX Ph. Code Number.After Completion, pay for your Vest. the Vest will be given on your next ride as a reward to your willingness.Congratulation! you are Now Officially a Legit member of Sniper MX Philippines Inc.

    0 comments

    ANG SNIPER MX PHILIPPINES PO AY SNIPER MX PHILIPPINES — Yamaha Sniper MX 135 150i Owners (SniperMX Philippines Visitors Page)

    ANG SNIPER MX PHILIPPINES PO AY SNIPER MX PHILIPPINES.

    the ONE, the Only

    *Ride as Brothers, Ride us Brothers*

    TRADING PAGE : https://www.facebook.com/group s/smxtrading/

    FAN PAGE : https://www.facebook.com/snipe rmx.ph?ref=hl

    VISITORS PAGE OF:

    ________________________________________ ______

    The "SNIPERMX PHILS., INC." ( SMX )

    https://www.facebook.com/group s/streetmonarchextreme/

    President AL https://www.facebook.com/alan2 18

    Vice President SESE https://www.facebook.com/sese1 968?fref=ts&ref=br_tf

    CHAPTERS:

    _____________________ _________________________

    NORTHSIDE Chapters

    1.NACALBU (Valenzuela to Bulacan)

    Chairman PROTAPER https://www.facebook.com/arist otle.patag?fref=ts

    2.ISABELA (Isabela)

    Chairman RHOD https://www.facebook.com/Lei.a lbano03?fref=ts

    3.KABALEN (Pampanga)

    Chairman BON https://www.facebook.com/johnr otsen.mentac?fref=ts

    Central Chapters

    1.xXx (West Caloocan/malabon/navotas/Q.C/Mla)

    Chairman THIZZ https://www.facebook.com/thizz z20?fref=ts

    2.BRT (North Caloocan/Nova//Fairview/SJDM)

    Chairman RYAN46 https://www.facebook.com/ryan. rieta?fref=ts

    3.EASTSIDE (Pasig/Marikina/Antipolo/Rizal)

    Chairman DNUMYAR https://www.facebook.com/dnumy ar.b?fref=ts

    SOUTHSIDE Chapters

    1.KILABOTS-(Pasay/LP/Pque/Taguig)

    Chairman KRUGER https://www.facebook.com/fredd ie.ibanez.7?fref=ts

    2.ETI_VAC (Cavite)

    Chairman ODIE https://www.facebook.com/odie. perry?fref=ts

    3.LAGUNA (Laguna)

    Chairman BOYBI https://www.facebook.com/boybi lis?fref=ts

    4.BONPEN (Bondoc/Peninsula QUEZON )

    Chairman SIERRAFOX https://www.facebook.com/richa rdteodylizaso.mendez?fref=ts

    HOW TO BE A SNIPER MX PHILIPPINES MEMBER (READ THIS)

    https://www.facebook.com/notes /yamaha-sniper-mx-135lc-owners -group/how-to-be-a-sniper-mx-p hilippines-member/430490483720 620

    0 comments

    gud mornin mga paps share lang mga paps kgbi kc pauwi ako gling dto sa work sa... — Yamaha Sniper 135 Classic

    gud mornin mga paps,share lang mga paps kgbi kc pauwi ako gling dto sa work sa makati ako nag work,tpos pauwi nko around mga 8:30 pm kgbi...sa may papuntang osmena hiway sa tapt ng cash and carry mat tulay paangat, nka sunod ako sa 6 wheeler truck, nsa right side kmi tpos lumipat ako sa left side kc ayaw ko tlga nka buntot sa mga malalaking truck...ngyon maya maya my kumkaskas sa ilalim ng truck tpos npansin ko may mag overtake skin sa kanan nka fz na nkasunod sa truck may mlking bakal pla n nklas sa truck d npcn ng nka fz un kya kabnga nya ung bakal buti nlng d nag semplng ung nka fz d ko nmn mhintuhan kc nga nsa tulay kmi tska ang bibilis ng mga sasakyan...hunbol ko ung truck para sbhin cla n may nkals sa truck nila at may muntik n may madigrasya...sbi lng ng nsa truck wala hayaan nlng daw,,pslmt cla d sumemplng ung nka fz......hihntay ko ung nka fz d nmn dumdting pra kausapn nya ung nsa trcuk.. naisip ko kung ako un bumanga sa bakal n nklas cgurado semplng ako kc sobrang loward ako at nka rim pa k,mniois din gulong ko....

    thanks god tlga mswerte pdin ako...ingat mga paps share ko lng

    1 comments
    • Buti alerto ka paps. Ride safe!

    Photos from A.j. Rock's post — YAMAHA Attitude Ltd

    I've been a member if this group for a while & haven't really participated, so I figured I'd post my attitude inspired bass. This started out as a 70's Creatline bass with a lipstick pickup. I dropped Nordstrand np4 & nj4se pickups along with a DiMarzio Will Power in the neck. Wired in stereo (DiMarzio through 1 & Nordstrands through the other), but with the ability to send all pickups through 1 input. I also swapped out the hardware for Hipshot A style bridge & Ultralite tuners with extender on the E. Great sounding bass.

    0 comments

    In my previous post you guys helped out tremendously my dad finally got the... — Yamaha Warrior Raptor YFM350

    In my previous post you guys helped out tremendously, my dad finally got the clutch going. Everything was working fine so he goes on a test run and tips around the beans field an all of a sudden he looses power and the bike stops pulling. What could be causing this?? Not enough tension on the spring bolts?

    10 comments
    • Did that, that making sure there wasn't anything else

    • Bolt springs is ur problem they have to be tight and the 6 lb torx is not hard use a 1\4 in drive ratchet 8 mm socket a turn till clutch assembly turns clock wise alil not to much though and not a lot of pressure or u will break the bolts

    • Yeah if the bolts are loose they won't keep proper spring tensioner against the clutch.. also the springs could be worn?

    Photos from Bruce Sharer's post — YAMAHA PICS MODIFICATIONS

    Picked up my 2004 Custom 1100 4 years ago. Pix from 2550 mile trip with friends to Yellowstone and Beartooth Pass last August.

    10 comments
    • We lived in MI for 7 years....got up north a few times on the bike. One year we did Lake Superiour in a clockwise fashion. And if you get back to Charlotte, stop over to Joes Gizzard City for me sometime!

    • Yes you have a point with pegs and changing positions, I remember doing that a lot on my old Honda, thanks most of potterville caught on fire a few years ago and was burnt almost down Joe's survived :) we have a weeks off in August and gonna see if we can make it to Washington state, if not , see how far we can get :)

    • Lots of good riding out this way once you get out of the plains. We drove from Ann Arbor to Tacoma via Trans Canada Hwy a few years ago....like stepping back to 1960's. Still a ton of mom and pop motels and restaurants. Was fun.

    My 250j I built a few years back no longer have it due to trying to appease my... — Enduro Yamaha IT Series

    My 250j I built a few years back, no longer have it due to trying to appease my wife at the time...now ex-wife...will never get rid of a bike again !... This inadvertently advertises my FB site ;)

    The yellow was done with sticker sheet.

    4 comments
    • Awesome bike! Sorry to here you don't have it anymore.

    • If it were between a Sheila and something I like to do.... I'd trade the Sheila.

    • been there ..but kept my toys.

    • if a chick made me choose my IT or her........it would be the longest wheelie she would ever see