• What s the latest year forks you can put on a 99 yz250

    What's the latest year forks you can put on a 99 yz250.

    12 comments
    • 16' if you swap the clamps. Gotta press the stem out of them and swap that

    • Im guessing if you dont want to swap triples, then up until 2005 i think

    • The bore diameter ofthe clamps arethe same 99-16. what they changed in 06 is the width. the forks are a bit wider from 06 on up. I have 2010 SSS forks in my 05 clamps and BRP helped me figure that out.

    • So the only difference is the gap between the forks is larger?

    • correct. Contact BRPmoto they can help you verify it. The clamp i ordered was int he 99-16 selection so as long as you have a 99 and newer than they should work just fine with your existing clamps.

    • Oh awesome! The more you know!

    • the yz250 1999 rebult forks are awesome i rode over a big downed tree 3rd gear pinned and i didnt see the tree it was so dusty or i woulda never done it, i felt alil something and looked down to see alarge tree at an angle !!!

    • 02 as changed on 04 46 on 2 and 48 04 onwards correct me if am wrong though

    • We put 2009 yz250f fork on our 04 yz 250 had to use the 09 triple clamps w a 06 yz450f stem. then we used the 09 calipers w and over sized rotor... During assembly

    • I read somewhere the 98-03 are direct fit. Anything up you have to change the Triple tree correct?

    • not sure buddy put in your year and model on this site. As long as the fork tube match the upper and lower triple clams u use. then just make sure you get the rt length stem for your bike you a good to go. http://www.yamahapartshouse.co m/oemparts/a/yam/53ea6d3bf8700 20a28eb7ef6/front-fork

    • I have a 2000 yz 250 and I have 2004 forks on mine